TI UCC27211DDAR
Half-Bridge Gate Driver IC Non-Inverting 8-SO PowerPad
브랜드: TI
제조업체부품 #: UCC27211DDAR
데이터 시트: UCC27211DDAR 데이터 시트 (PDF)
패키지/케이스: SOP-8
상품 유형: Power Driver ICs
UCC27211DDAR 일반적인 설명
The UCC27210 and UCC27211 drivers are based on the popular UCC27200 and UCC27201 MOSFET drivers, but offer several significant performance improvements. Peak output pull-up and pull-down current has been increased to 4-A source and 4-A sink, and pull-up and pull-down resistance have been reduced to 0.9 Ω, thereby allowing for driving large power MOSFETs with minimized switching losses during the transition through the Miller Plateau of the MOSFET. The input structure is now able to directly handle 10 VDC, which increases robustness and also allows direct interface to gate-drive transformers without using rectification diodes. The inputs are also independent of supply voltage and have a maximum rating of 20-V.
The switching node (HS pin) of the UCC2721x can handle 18 V maximum which allows the high-side channel to be protected from inherent negative voltages caused parasitic inductance and stray capacitance. The UCC27210 (Pseudo-CMOS inputs) and UCC27211 (TTL inputs) have increased hysteresis allowing for interface to analog or digital PWM controllers with enhanced noise immunity.
The low-side and high-side gate drivers are independently controlled and matched to 2 ns between the turnon and turnoff of each other.
An on-chip 120-V rated bootstrap diode eliminates the external discrete diodes. Undervoltage lockout is provided for both the high-side and the low-side drivers providing symmetric turnon and turnoff behavior and forcing the outputs low if the drive voltage is below the specified threshold.
Both devices are offered in 8-pin SOIC (D), PowerPAD SOIC-8 (DDA), 4-mm × 4-mm SON-8 (DRM) and SON-10 (DPR) packages.
특징
- Drives Two N-Channel MOSFETs in High-Side
and Low-Side Configuration With Independent
Inputs - Maximum Boot Voltage 120-V DC
- 4-A Sink, 4-A Source Output Currents
- 0.9-Ω Pullup and Pulldown Resistance
- Input Pins Can Tolerate –10 V to 20 V and Are
Independent of Supply Voltage Range - TTL or Pseudo-CMOS Compatible Input Versions
- 8-V to 17-V VDD Operating Range, (20-V Absolute
Maximum) - 7.2-ns Rise and 5.5-ns Fall Time With 1000-pF
Load - Fast Propagation Delay Times (18 ns Typical)
- 2-ns Delay Matching
- Symmetrical Undervoltage Lockout for High-Side
and Low-Side Driver - All Industry Standard Packages Available (SOIC-8,
PowerPAD™ SOIC-8, 4-mm × 4-mm SON-8
and 4-mm × 4-mm SON-10) - Specified from –40 to 140 °C
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Bus voltage (max) (V) | 110 | Power switch | MOSFET |
Input VCC (min) (V) | 8 | Input VCC (max) (V) | 17 |
Peak output current (A) | 4 | Operating temperature range (°C) | -40 to 140 |
Undervoltage lockout (typ) (V) | 8 | Rating | Catalog |
Propagation delay time (µs) | 0.02 | Rise time (ns) | 8 |
Fall time (ns) | 7 | Iq (mA) | 0.001 |
Input threshold | TTL | Channel input logic | TTL |
Negative voltage handling at HS pin (V) | -12 |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The UCC27211DDAR chip is a dual-channel, high-speed gate driver designed for driving power MOSFETs in applications such as motor control, power supplies, and lighting. It offers robust protection features and excellent performance, making it ideal for high-power applications requiring fast switching speeds and precise control.
-
Equivalent
The equivalent products of UCC27211DDAR chip are UCC27211, UCC27212, UCC27213, and UCC27214. These chips are part of the UCC27211 family of high-speed, gate drivers with 4 A source and 4 A sink current capability. They are designed for driving power MOSFETs and IGBTs in half-bridge and full-bridge configurations. -
Features
1. Dual 4-A/8-A peak source/sink output current 2. Supports up to 60-V input voltage 3. Integrated bootstrap diode 4. Programmable dead time control 5. Adaptive shoot-through protection 6. Integrated undervoltage lockout and thermal shutdown 7. 5-V regulator with 10-mA output 8. Adjustable soft-start 9. Supports up to 2.2-MHz switching frequency -
Pinout
The UCC27211DDAR has 8 pins and functions as a high-speed, dual MOSFET driver with 4-A peak source and sink current capabilities. It is commonly used in high-side and low-side driver applications, such as synchronous buck converters and half-bridge inverters. -
Manufacturer
The UCC27211DDAR is manufactured by Texas Instruments, a leading semiconductor company that produces a wide range of integrated circuits and embedded processors for various industries including automotive, industrial, and consumer electronics. Texas Instruments is known for its high-quality products and innovative solutions in the field of analog and digital technologies. -
Application Field
The UCC27211DDAR is commonly used in high-side or low-side gate driver applications for power MOSFETs and IGBTs. It finds applications in power supplies, motor drives, and inverter systems for industrial and automotive sectors. Its features like high output current, low propagation delay, and high common-mode rejection ratio make it suitable for fast switching and high efficiency systems. -
Package
The UCC27211DDAR chip comes in a standard surface mount package type known as SOIC-8. It is a dual-channel low side gate driver with a form factor of an integrated circuit (IC) and a standardized size of 8 pins.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증