ST TL072CN
These devices amplify the difference in voltage between two input terminals
브랜드: Stmicroelectronics
제조업체부품 #: TL072CN
데이터 시트: TL072CN Datasheet (PDF)
패키지/케이스: PDIP-8
RoHS 상태:
재고상태: 2149 PC, 새로운 원본
상품 유형: 증폭기 IC
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*모든 가격은 USD 단위입니다.
수량 | 단가 | 추가 가격 |
---|---|---|
5 | $0.225 | $1.125 |
50 | $0.183 | $9.150 |
150 | $0.164 | $24.600 |
500 | $0.141 | $70.500 |
2500 | $0.132 | $330.000 |
5000 | $0.125 | $625.000 |
In Stock:2149 PCS
TL072CN 일반적인 설명
The TL072CN is a widely used operational amplifier (op-amp) integrated circuit.
특징
Dual Operational Amplifier: The TL072CN contains two independent operational amplifiers in a single package.
Low Noise: It is known for having low noise characteristics, making it suitable for applications where signal fidelity is important.
Low Input Bias and Offset Current: These parameters contribute to the precision of the op-amp in terms of input characteristics.
Wide Bandwidth: The TL072CN has a relatively wide bandwidth, making it suitable for various audio and general-purpose applications.
Low Input Offset Voltage: The low input offset voltage is essential for minimizing errors in voltage amplification applications.
High Input Impedance: The op-amp has a high input impedance, which makes it compatible with a variety of input sources.
Low Total Harmonic Distortion (THD): It exhibits low distortion, making it suitable for audio applications where signal quality is crucial.
Wide Supply Voltage Range: It can operate with a wide range of supply voltages.
Dual JFET Input: The op-amp has dual JFET inputs, contributing to its low input bias current and offset voltage.
Common-Mode Input Voltage Range Includes Ground: This feature enhances the versatility of the op-amp in single-supply applications.
No Frequency Compensation Required: The TL072CN is designed for stable operation without the need for external frequency compensation.
애플리케이션
Audio Preamplifiers: Due to its low noise and distortion characteristics, it's commonly used in audio preamplifiers and other audio processing circuits.
Active Filters: The TL072CN is suitable for active filter circuits due to its wide bandwidth and low distortion.
Instrumentation Amplifiers: It can be used in instrumentation amplifiers where precision and low noise are critical.
Voltage Followers: The op-amp can be configured as a voltage follower to isolate input and output impedances.
Signal Conditioning Circuits: It is employed in various signal conditioning circuits where accurate signal processing is required.
Low-Frequency Oscillators: The TL072CN can be used in low-frequency oscillator circuits.
Precision Comparators: In applications where precision voltage comparisons are needed.
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
등가 부품
에 대한 TL072CN 구성 요소인 경우 이러한 교체 및 대체 부품을 고려할 수 있습니다.:
부품 번호
브랜드
패키지
설명
부품 번호 : NE5532
브랜드 :
패키지 :
설명 :
부품 번호 : LF353
브랜드 :
패키지 :
설명 :
부품 번호 : LM358
브랜드 :
패키지 :
설명 :
부품 번호 : LM833
브랜드 :
패키지 :
설명 :
부품 번호 : OP275
브랜드 :
패키지 : SOP8
설명 : Dual Bipolar / JFET, Audio Operational Amplifier
부품 번호 : OPA2134
브랜드 :
패키지 :
설명 :
부품 번호 : OPA2604
브랜드 :
패키지 :
설명 :
부품 포인트
-
The TL072CN is a popular dual operational amplifier chip. it is designed for low noise and high-speed applications in a wide range of electronic devices. the chip offers a high input impedance and low input offset voltage, making it suitable for audio amplification and signal conditioning circuits. the TL072CN is commonly used in audio mixers, musical instruments, and professional audio equipment.
-
Equivalent
Some equivalent products of the TL072CN chip include the njm072, rc4558, and ne5532p. -
Features
The TL072CN is an operational amplifier with high voltage gain and low noise. it has a wide bandwidth and a high slew rate, making it suitable for applications requiring high precision and fast response. it has two operational amplifiers in a single package, and it can operate with a wide range of power supply voltages. -
Pinout
The TL072CN is a dual operational amplifier with a pin count of 8. pin 1 is the offset null terminal for channel 1, pin 2 is the inverting input of channel 1, pin 3 is the non-inverting input of channel 1, pin 4 is the negative supply voltage, pin 5 is the offset null terminal for channel 2, pin 6 is the inverting input of channel 2, pin 7 is the non-inverting input of channel 2, and pin 8 is the positive supply voltage. -
Manufacturer
The TL072CN is manufactured by texas instruments, a multinational semiconductor company based in the united states. texas instruments is known for producing a wide range of integrated circuits and semiconductors used in various industries, including consumer electronics, telecommunications, and automotive applications. -
Application Field
The TL072CN is typically used in audio applications, such as amplifiers, mixers, equalizers, and audio effect units. it is also employed in instrumentation and control systems, signal conditioning, and low-frequency filters. -
Package
The TL072CN chip has a dip-8 package type, meaning it has 8 leads in a dual in-line package. the form is a through-hole, meaning the leads go through holes in the circuit board for soldering. the chip's size in millimeters is typically around 9.35 x 6.35 x 3.3 (length x width x height).
데이터 시트 PDF
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증