ST TS914IDT
Operational Amplifiers - Op Amps Quad Rail-to-Rail 3V
TS914IDT 일반적인 설명
The TS914 device is a rail-to-rail CMOS quad operational amplifier designed to operate with a single or dual supply voltage.The input voltage range Vicmincludes the two supply rails VCC+and VCC-.The output reaches VCC-+50 mV, VCC+-50 mV, with RL= 10 kΩ, and VCC-+350 mV, VCC+-350 mV, with RL= 600 Ω.This product offers a broad supply voltage operating range from 2.7 to 16 V and a supply current of only 200 μA/amp (VCC= 3 V).The source and sink output current capability is typically 40 mA (at VCC= 3 V), fixed by an internal limitation circuit.
특징
- Rail-to-rail input and output voltage ranges
- Single (or dual) supply operation from 2.7 to 16 V
- Extremely low input bias current: 1 pA typical
- Low input offset voltage: 5 mV max. (A grade)
- Specified for 600 Ω and 100 Ω loads
- Low supply current: 200 μA/ampli. (VCC= 3 V)
- Latch-up immunity
- Spice macromodel included in this specification
- Related products
- See TS56x series for better accuracy and smaller packages
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | Operational Amplifiers - Op Amps |
RoHS: | Details | Mounting Style: | SMD/SMT |
Package / Case: | SOIC-14 | Number of Channels: | 4 Channel |
Supply Voltage - Max: | 16 V, +/- 8 V | GBP - Gain Bandwidth Product: | 1 MHz |
Output Current per Channel: | 60 mA | SR - Slew Rate: | 800 mV/us |
Vos - Input Offset Voltage: | 10 mV | Supply Voltage - Min: | 2.7 V, +/- 1.35 V |
Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 125 C |
Ib - Input Bias Current: | 150 pA | Operating Supply Current: | 230 uA |
Shutdown: | No Shutdown | CMRR - Common Mode Rejection Ratio: | 85 dB |
en - Input Voltage Noise Density: | 30 nV/sqrt Hz | Series: | TS914 |
Packaging: | MouseReel | Amplifier Type: | CMOS Amplifier |
Brand: | STMicroelectronics | Height: | 1.65 mm |
Input Type: | Rail-to-Rail | Ios - Input Offset Current: | 1 pA |
Length: | 8.75 mm | Minimum Dual Supply Voltage: | +/- 1.35 V |
Operating Supply Voltage: | 2.7 V to 16 V, +/- 1.35 V to +/- 8 V | Output Type: | Rail-to-Rail |
Product: | Operational Amplifiers | Product Type: | Op Amps - Operational Amplifiers |
PSRR - Power Supply Rejection Ratio: | 80 dB | Factory Pack Quantity: | 2500 |
Subcategory: | Amplifier ICs | Supply Type: | Single, Dual |
Technology: | CMOS | Voltage Gain dB: | 92.04 dB |
Width: | 4 mm |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The TS914IDT is a quad operational amplifier chip that offers low noise and low input bias currents. It is well-suited for applications in audio processing, sensor interfaces, and signal conditioning. Its wide supply voltage range and rail-to-rail output make it versatile for a variety of circuit designs.
-
Equivalent
The equivalent products of TS914IDT chip are TS914AID, TS914AIY, TS914BIY, TS914AI, and TS914BI. These are all quad low-power rail-to-rail operational amplifiers with a supply voltage range of 2.7V to 6V and 1MHz bandwidth. -
Features
The TS914IDT is a low-power voltage feedback rail-to-rail operational amplifier with a supply voltage range of 2.7V to 16V. It features a low input bias current, low offset voltage, and high output current capability. It is designed for a wide range of applications, including battery-powered equipment, portable instrumentation, and audio amplifiers. -
Pinout
The TS914IDT is a quad operational amplifier with a DFN8 package. It has 8 pins, with the functions of Vcc, inverting input, non-inverting input, output, and ground for each of the four amplifiers. It is commonly used for general purpose audio applications. -
Manufacturer
The manufacturer of the TS914IDT is STMicroelectronics. STMicroelectronics is a global semiconductor company that designs, manufactures, and markets a range of integrated circuits and other components for a variety of industries including automotive, industrial, and consumer electronics. They are known for producing high-quality and innovative semiconductor solutions for a wide range of applications. -
Application Field
The TS914IDT is commonly used in various applications such as audio amplifiers, filters, instrumentation amplifiers, low-power applications, and industrial control systems. It can also be used in battery-operated devices, consumer electronics, and sensor interface circuits for its low-power consumption, rail-to-rail input and output capabilities, and wide supply voltage range. -
Package
The TS914IDT chip is a dual operational amplifier that comes in a small outline package (SO-8). It is available in a surface mount form and has a package size of 4.9mm x 3.9mm.
데이터 시트 PDF
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증