NXP MMC2107CFCAG33
32-bit Microcontrollers - MCU 32 Bit 33MHz
MMC2107CFCAG33 일반적인 설명
M210 MCore Microcontroller IC 16/32-Bit 33MHz 128KB (128K x 8) FLASH 144-LQFP (20x20)
특징
- Features of the MMC2107 include:
- MCORE M210 integer processor:
- – 32-bit reduced instruction set computer (RISC) architecture
- – Low power and high performance
- OnCE™ debug support
- On-chip 128-Kbyte FLASH:
- – Motorola’s one transistor, CDR MoneT(1) FLASH bit cell
- – Page mode (2111) read access
- – External VPP required for programming
- – 16-K block size
- On-chip, 8-Kbyte static random-access memory (SRAM):
- – One clock per access (including bytes, half-words, and words)
- – Byte, half-word (16 bits), and word (32 bits) read/write accesses
- – Standby power supply support
- Serial peripheral interface (SPI):
- – Master mode and slave mode
- – Wired-OR mode
- – Slave select output
- – Mode fault error flag with CPU interrupt capability
- – Double-buffered operation
- – Serial clock with programmable polarity and phase
- – Control of SPI operation during wait mode
- – Reduced drive control
- Two serial communications interfaces (SCI):
- – Full-duplex operation
- – Standard mark/space non-return-to-zero (NRZ) format
- – 13-bit baud rate selection
- – Programmable 8-bit or 9-bit data format
- – Separately enabled transmitter and receiver
- – Separate receiver and transmitter CPU interrupt requests
- – Programmable transmitter output polarity
- – Two receiver wakeup methods (idle line and address mark)
- – Interrupt-driven operation with eight flags
- – Receiver framing error detection
- – Hardware parity checking
- – 1/16 bit-time noise detection
- – General-purpose input/output port
- Two timers:
- – Four 16-bit input capture/output compare channels
- – 16-bit architecture
- – 16-bit pulse accumulator
- – Pulse widths variable from microseconds to seconds
- – Prescaler
- – Toggle-on-overflow feature for pulse-width modulator (PWM) generation
- – Timer port pullups enabled on reset
- Queued analog-to-digital converter (QADC):
- – Eight analog input channels
- – 10-bit resolution ±2 counts accuracy
- – Minimum 7 µs conversion time
- – Internal sample and hold
- – Programmable input sample time for various source impedances
- – Two conversion command queues with a total of 64 entries
- – Subqueues possible using pause mechanism
- – Queue complete and pause software interrupts available on both queues
- – Queue pointers indicate current location for each queue
- – Automated queue modes initiated by:
- External edge trigger and gated trigger
- Periodic/interval timer, within queued analog-to-digital converter (QADC) module {queue1 and queue2}
- Software command
- – Single-scan or continuous-scan of queues
- – Output data readable in three formats:
- Right-justified unsigned
- Left-justified signed
- Left-justified unsigned
- – Unused analog channels can be used as digital input/output (I/O)
- – Minimum pin set configuration implemented (Continue)
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Manufacturer | NXP | Product Category | 32-bit Microcontrollers - MCU |
RoHS | Details | Series | MMC2107 |
Mounting Style | SMD/SMT | Package / Case | LQFP-144 |
Core | M-CORE | Program Memory Size | 128 kB |
Data RAM Size | 8 kB | Data Bus Width | 32 bit |
Maximum Clock Frequency | 33 MHz | Number of I/Os | 72 I/O |
Supply Voltage - Min | 2.7 V | Supply Voltage - Max | 3.6 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Packaging | ["Tray"] | Brand | NXP Semiconductors |
Data ROM Size | 128 kB | Data ROM Type | Flash/EEPROM |
Height | 1.4 mm | Interface Type | SCI, SPI |
Length | 20 mm | Moisture Sensitive | Yes |
Number of Timers/Counters | 2 Timer | Processor Series | MMC2107 |
Product Type | 32-bit Microcontrollers - MCU | Program Memory Type | EEPROM, Flash |
Factory Pack Quantity | 300 | Subcategory | Microcontrollers - MCU |
Width | 20 mm |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
MMC2107CFCAG33 is a chip used in automotive applications. It is designed to provide accurate sensing and measurement of various parameters such as acceleration, inclination, and vibration. It offers high performance and robustness, making it suitable for demanding automotive environments. The chip incorporates advanced features and interfaces that facilitate easy integration into vehicle systems, enabling better control and safety.
-
Equivalent
There are no direct equivalent products for the MMC2107CFCAG33 chip. However, alternative options for similar functions may include the STM32F103C8T6 or the ATSAM3X8E microcontrollers. It is recommended to consult the datasheets of these options to identify the best fit for specific requirements. -
Features
The MMC2107CFCAG33 is a micro-electromechanical system (MEMS) accelerometer that offers high accuracy, low noise, and a built-in temperature sensor. It has a measurement range of ±2 g and provides digital output through a serial peripheral interface (SPI). The device is designed for applications requiring precise motion sensing and vibration monitoring. -
Pinout
The MMC2107CFCAG33 is a Microchip Technology accelerometer sensor with a pin count of 16. The function of the device is to measure acceleration and provide the corresponding outputs. -
Application Field
The MMC2107CFCAG33 is a 3-axis magnetic field sensor suitable for applications such as industrial control systems, robotics, and navigation systems. It can be used for position sensing, motion detection, and magnetic field measurement in various electronic devices and equipment. -
Package
The MMC2107CFCAG33 chip is packaged in a ceramic flip-chip form with a size of 5 x 5 mm.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증