주문 금액이
$5000Microchip MCP2210-I/SO
Interface IC for USB to SPI Communication
브랜드: Microchip
제조업체부품 #: MCP2210-I/SO
데이터 시트: MCP2210-I/SO Datasheet (PDF)
패키지/케이스: SOIC-20
상품 유형: Controllers
MCP2210-I/SO 일반적인 설명
The MCP2210-I/SO is a versatile USB-to-SPI Master converter that streamlines USB connectivity in applications utilizing an SPI interface. This device boasts integrated USB termination resistors, effectively reducing the need for external components. Additionally, it comes equipped with 256 bytes of user EEPROM for added functionality. With nine general purpose input/output pins, the MCP2210 offers flexibility in various applications. Notably, seven of these pins offer alternate functions to provide users with key information regarding USB and communication status. As a reliable and efficient solution, the MCP2210-I/SO caters to a wide range of needs, making it a valuable addition to any project requiring USB-to-SPI conversion
특징
애플리케이션
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Upstream Port | USB 2.0 | USB Speed | Full Speed |
Down stream Ports | SPI | MCU Interface | SPI |
Tx Buffer Size | 64 | Rx Buffer Size | 64 |
GPIOs | 9 | OpVoltage | 3.3 to 5.5 |
MGMT I/F | SPI | ROM I/F | No |
UART | No | CompactFlash | No |
Memory Stick | No | xD Picture Card | No |
Temp Range Min | -40 |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The MCP2210-I/SO chip is an advanced USB-to-SPI (Serial Peripheral Interface) converter. It allows for easy communication between a microcontroller or host device and SPI devices via USB. It supports both SPI master and slave modes and offers features such as programmable chip select pins, configurable GPIO pins, and built-in EEPROM. The MCP2210-I/SO chip is commonly used in applications requiring USB connectivity to SPI devices, such as industrial control systems and electronic instrumentation.
-
Equivalent
Some equivalent products to the MCP2210-I/SO chip include the FT2232H, FT232H, and the CP2102. These chips offer similar functionalities such as USB-to-SPI/I2C communication and are commonly used in various applications requiring SPI or I2C interfacing. -
Features
The MCP2210-I/SO is a USB to SPI converter that features a configurable controller area network (CAN) bus, up to 13 GPIO pins, and a 256-byte integrated EEPROM. It offers programmable settings, on-chip voltage regulators, and supports asynchronous and synchronous serial communication at speeds up to 12 Mbps. -
Pinout
The MCP2210-I/SO is a 20-pin USB-to-SPI (Serial Peripheral Interface) converter. It is used to establish communication between a USB host and devices that use SPI protocol. The converter provides a USB interface, control pins, and an SPI interface, enabling devices to communicate with each other. -
Manufacturer
The manufacturer of the MCP2210-I/SO is Microchip Technology Inc. It is a leading provider of microcontroller, mixed-signal, analog, and Flash-IP solutions. Microchip Technology designs and manufactures a wide range of semiconductor products used in various industries such as automotive, consumer electronics, industrial automation, and more. -
Application Field
The MCP2210-I/SO is commonly used in applications such as industrial automation, consumer electronics, medical devices, and automotive systems. It provides a seamless interface between a host microcontroller and various external devices, such as sensors, actuators, and displays, enabling communication and control via SPI protocol. -
Package
The MCP2210-I/SO chip comes in an SOP package type, with a form factor in the industry-standard 20-pad SOIC (Small Outline Integrated Circuit) variant. The size of the package is typically 3.9mm x 7.5mm.
데이터 시트 PDF
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증
Excellent customer service and top-quality products make Ovaga a great option for all your electronic component needs.