주문 금액이
$5000MC9S12DT256
16-BitMicrocontroller
특징
- HCS12 Core
- – 16-bit HCS12 CPU
- i. Upward compatible with M68HC11 instruction set
- ii. Interrupt stacking and programmer’s model identical to M68HC11
- iii.Instruction queue
- iv. Enhanced indexed addressing
- – MEBI (Multiplexed External Bus Interface)
- – MMC (Module Mapping Control)
- – INT (Interrupt control)
- – BKP (Breakpoints)
- – BDM (Background Debug Mode)
- CRG
- – Low current Colpitts or Pierce oscillator
- – PLL
- – COP watchdog
- – Real time interrupt
- – Clock Monitor
- 8-bit and 4-bit ports with interrupt functionality
- – Digital filtering
- – Programmable rising or falling edge trigger
- Memory
- – 256K Flash EEPROM
- – 4K byte EEPROM
- – 12K byte RAM
- Two 8-channel Analog-to-Digital Converters
- – 10-bit resolution
- – External conversion trigger capability
- Three 1M bit per second, CAN 2.0 A, B software compatible modules
- – Five receive and three transmit buffers
- – Flexible identifier filter programmable as 2 x 32 bit, 4 x 16 bit or 8 x 8 bit
- – Four separate interrupt channels for Rx, Tx, error and wake-up
- – Low-pass filter wake-up function
- – Loop-back for self test operation
- Enhanced Capture Timer
- – 16-bit main counter with 7-bit prescaler
- – 8 programmable input capture or output compare channels
- – Four 8-bit or two 16-bit pulse accumulators
- 8 PWM channels
- – Programmable period and duty cycle
- – 8-bit 8-channel or 16-bit 4-channel
- – Separate control for each pulse width and duty cycle
- – Center-aligned or left-aligned outputs
- – Programmable clock select logic with a wide range of frequencies
- – Fast emergency shutdown input
- – Usable as interrupt inputs
- Serial interfaces
- – Two asynchronous Serial Communications Interfaces (SCI)
- – Three Synchronous Serial Peripheral Interface (SPI)
- Byte Data Link Controller (BDLC)
- – SAE J1850 Class B Data Communications Network Interface Compatible and ISO Compatible for Low-Speed (<125 Kbps) Serial Data Communications in Automotive Applications
- Inter-IC Bus (IIC)
- – Compatible with I2C Bus standard
- – Multi-master operation
- – Software programmable for one of 256 different serial clock frequencies
- 112-Pin LQFP package
- – I/O lines with 5V input and drive capability
- – 5V A/D converter inputs
- – Operation at 50MHz equivalent to 25MHz Bus Speed
- – Development support
- – Single-wire background debug™ mode (BDM)
- – On-chip hardware breakpoints
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Manufacturer | Freescale / NXP |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증