주문 금액이
$5000ADI MAX660EPA
CMOS Monolithic Voltage Converter
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
MAX660EPA 일반적인 설명
The MAX660 monolithic, charge-pump voltage inverter converts a +1.5V to +5.5V input to a corresponding-1.5V to -5.5V output. Using only two low-costcapacitors, the charge pump's 100mA output replaces switching regulators, eliminating inductors and their associated cost, size, and EMI. Greater than 90% efficiency over most of its load-current range combined with a typical operating current of only 120µA provides ideal performance for both battery-powered and board-level voltage conversion applications. The MAX660 can also double the output voltage of an input power supply or battery, providing +9.35V at 100mA from a +5V input.
![max660epa max660epa](/files/uploads/product/b/max660epa20161205150600_3993.jpg)
특징
- Small Capacitors
- 0.65V Typ Loss at 100mA Load
- Low 120µA Operating Current
- 6.5Ω Typ Output Impedance
- Guaranteed ROUT < 15Ω for C1 = C2 = 10µF
- Pin-Compatible High-Current ICL7660 Upgrade
- Inverts or Doubles Input Supply Voltage
- Selectable Oscillator Frequency: 10kHz/80kHz
- 88% Typ Conversion Efficiency at 100mA (IL to GND)
애플리케이션
- Handheld Instruments (PDAs, Palmtops)
- Interface Power Supplies
- Laptop Computers
- Medical Instruments
- Operational Amplifier Power Supplies
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Manufacturer: | Analog Devices Inc. | Product Category: | Switching Voltage Regulators |
Mounting Style: | Through Hole | Package / Case: | PDIP-8 |
Topology: | Inverting | Output Voltage: | - 1.5 V to - 5.5 V, 3 V to 11 V |
Output Current: | 100 mA | Number of Outputs: | 1 Output |
Input Voltage, Min: | 1.5 V | Input Voltage, Max: | 5.5 V |
Switching Frequency: | 10 kHz to 80 kHz | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Series: | MAX660 |
Packaging: | Tube | Brand: | Analog Devices / Maxim Integrated |
Function: | Inverting, Step Up | Height: | 4.45 mm |
Length: | 9.91 mm | Product Type: | Switching Voltage Regulators |
Factory Pack Quantity: | 50 | Subcategory: | PMIC - Power Management ICs |
Type: | Voltage Converter | Width: | 7.87 mm |
Part # Aliases: | MAX660 |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
등가 부품
에 대한 MAX660EPA 구성 요소인 경우 이러한 교체 및 대체 부품을 고려할 수 있습니다.:
부품 번호
브랜드
패키지
설명
부품 번호 : ICL7660CPA
브랜드 :
패키지 : PDIP-8
설명 : Charge pumps switched-capacitor voltage converter
부품 번호 : TC7660CPA
브랜드 :
패키지 : PDIP-8
설명 : Charge Pump INV -10V to -1.5V 20mA Automotive
부품 번호 : ICL7660SCPAZ
브랜드 :
패키지 : PDIP-8
설명 : Charge Pump INV/STPUP/STPDN -1.5V to -12V/1.5V to 22.8V 45mA 8-Pin PDIP Tube
부품 번호 : NJM7660M
브랜드 :
패키지 :
설명 : from NJR Corporation
부품 포인트
-
The MAX660EPA is a versatile charge-pump voltage converter IC designed for use in a wide range of applications. It can double voltage, invert voltage, and perform other voltage conversion functions. The chip operates over a wide voltage range and can be used in portable devices, power supplies, and other electronics applications.
-
Equivalent
Some equivalent products of MAX660EPA chip are LTC1044, ICL7660, and MAX1044. These chips are charge-pump voltage converters that generate a negative supply voltage from a positive input voltage. They are used for a variety of applications such as powering op-amps and other electronic circuits that require dual supply voltages. -
Features
The MAX660EPA is a monolithic voltage converter with an on-chip oscillator designed to generate a regulated -5V output from a single +5V supply. It offers a high efficiency of up to 96%, low quiescent current, and can deliver up to 20mA output current. It is available in a space-saving 8-pin DIP package. -
Pinout
The MAX660EPA is a monolithic, charge-pump voltage inverter with voltage converter capabilities. It has an 8-pin PDIP package and provides an output voltage of -5V. Pin functions are Vin (input voltage), GND (ground), Vout (output voltage), SHDN (shutdown), OSC (oscillator), C1+, C1- (capacitor connections), C2+, and C2- (capacitor connections). -
Manufacturer
The MAX660EPA is manufactured by Maxim Integrated, a semiconductor company specializing in analog and mixed-signal integrated circuits. Founded in 1983, Maxim Integrated is known for producing components that are used in a wide range of industries such as automotive, consumer electronics, industrial, and healthcare. -
Application Field
The MAX660EPA is commonly used in power supply applications to provide a regulated negative voltage, generating -5V from a positive input voltage. It can also be used in battery-powered applications, voltage inverter circuits, and other applications requiring a negative voltage reference. -
Package
The MAX660EPA chip comes in an 8-pin PDIP package and is in the form of a single IC (integrated circuit). The size of the package is 9.81mm x 6.45mm x 4.32mm.
데이터 시트 PDF
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증