주문 금액이
$5000TI ISO1042BDW
1/1 Transceiver Full CANbus 16-SOIC
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ISO1042BDW 일반적인 설명
The ISO1042 device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. The ISO1042 device offers ±70-V DC bus fault protection and ±30-V common-mode voltage range. The device supports up to 5-Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN. This device uses a silicon dioxide (SiO2) insulation barrier with a withstand voltage of 5000 VRMS and a working voltage of 1060 VRMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage, and prevents noise currents from the bus from entering the local ground. The ISO1042 device is available for both basic and reinforced isolation (see Reinforced and Basic Isolation Options). The ISO1042 device supports a wide ambient temperature range of –40°C to +125°C. The device is available in the SOIC-16 (DW) package and a smaller SOIC-8 (DWV) package.
특징
- Meets the ISO 11898-2:2016 physical layer standard
- Supports classic CAN up to 1 Mbps and FD (Flexible Data Rate) up to 5 Mbps
- Low loop delay: 152 ns
- Protection features
- DC bus fault protection voltage: ±70 V
- HBM ESD tolerance on bus pins: ±16 kV
- Driver Dominant Time Out (TXD DTO)
- Undervoltage protection on VCC1 and VCC2
- Common-Mode Voltage Range: ±30 V
- Ideal passive, high impedance bus terminals when unpowered
- High CMTI: 100 kV/µs
- VCC1 voltage range: 1.71 V to 5.5 V
- Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic interface to the CAN controller
- VCC2 Voltage Range: 4.5 V to 5.5 V
- Robust Electromagnetic Compatibility (EMC)
- System-level ESD, EFT, and surge immunity
- Low emissions
- Ambient Temperature Range: –40°C to +125°C
- 16-SOIC and 8-SOIC package options
- Automotive version available: ISO1042-Q1
- Safety-related certifications:
- 7071-VPK VIOTM and 1500-VPK VIORM (Reinforced and Basic Options) per DIN VDE V 0884-11:2017-01
- 5000-VRMS Isolation for 1 Minute per UL 1577
- IEC 60950-1, IEC 60601-1 and EN 61010-1 certifications
- CQC, TUV and CSA certifications
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | CAN Interface IC |
RoHS | Details | Series | ISO1042 |
Type | High Speed CAN Transceiver | Mounting Style | SMD/SMT |
Package / Case | SOIC-16 | Data Rate | 5 Mb/s |
Number of Drivers | 1 Driver | Number of Receivers | 1 Receiver |
Supply Voltage - Min | 1.71 V | Supply Voltage - Max | 5.5 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 125 C |
Operating Supply Current | 43 mA | ESD Protection | 16 kV |
Brand | Texas Instruments | Development Kit | ISO1042DWEVM |
Interface Type | CAN | Isolation Type | Galvanic |
Moisture Sensitive | Yes | Operating Supply Voltage | 1.71 V to 5.5 V |
Pd - Power Dissipation | 385 mW | Product | CAN Transceivers |
Product Type | CAN Interface IC | Propagation Delay Time | 76 ns |
Protocol Supported | CAN FD | Factory Pack Quantity | 40 |
Subcategory | Interface ICs |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증