TI ISO1044BDR
CAN Interface IC Isolated CAN FD transceiver in small package 8-SOIC -40 to 125
ISO1044BDR 일반적인 설명
The ISO1044B device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. The ISO1044B device offers ±58-V DC bus fault protection and ±12-V common-mode voltage range. The device supports up to 5-Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN. This device uses a silicon dioxide (SiO2) insulation barrier with a withstand voltage of 3000 VRMS and a working voltage of 450 VRMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage, and prevents noise currents from the bus from entering the local ground. The ISO1044B device supports a wide ambient temperature range of –40°C to +125°C. The device is available in the small SOIC-8 (D) package which significantly reduces the solution size compared to a traditional approach using optocouplers to isolate the CAN transceiver.
특징
- Meets the ISO 11898-2:2016 physical layer standard
- Supports classic CAN up to 1 Mbps and FD (flexible data rate) up to 5 Mbps
- Protection features
- DC Bus Fault Protection Voltage: ±58 V
- IEC ESD tolerance on bus pins: ±8 kV
- HBM ESD tolerance on bus pins: ±10 kV
- Driver dominant time out (TXD DTO)
- Undervoltage protection on VCC1 and VCC2
- Common-mode voltage range: ±12 V
- Ideal passive, high impedance bus terminals when unpowered
- High CMTI: 85 kV/µs minimum
- VCC1 voltage range: 1.71 V to 5.5 V
- Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic interface to the CAN controller
- VCC2 voltage range: 4.5 V to 5.5 V
- Robust electromagnetic compatibility (EMC)
- System-Level ESD, EFT, and surge Immunity
- Low Emissions
- Ambient temperature range: –40°C to +125°C
- 8-SOIC package
- Safety-related certifications:
- All certifications planned
- VDE reinforced insulation per DIN VDE V 0884-11:2017-01
- UL 1577 component recognition program
- IEC 60950-1, IEC 62368-1, IEC 61010-1 and GB 4943.1-2011 certifications
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Rating | Catalog | Isolation rating | Basic |
Data rate (max) (MBps) | 5 | Working isolation voltage (VIOWM) (Vrms) | 459 |
Surge isolation voltage (VIOSM) (VPK) | 5000, 8000 | Transient isolation voltage (VIOTM) (VPK) | 4242 |
Withstand isolation voltage (VISO) (Vrms) | 3000 | CMTI (min) (kV/µs) | 85 |
Supply voltage (V) | 1.71 to 5.5, 4.5 to 5.5 | Bus fault voltage (V) | -58 to 58 |
Common-mode voltage (V) | -12 to 12 |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The ISO1044BDR is a digital isolator with reinforced insulation for high voltage applications. It provides up to 4 kVrms continuous isolation, helping to protect sensitive circuits from voltage spikes and noise. The chip features a wide operating temperature range and low power consumption, making it suitable for industrial, automotive, and other demanding environments.
-
Equivalent
The equivalent products of ISO1044BDR chip are ISO1044DBR, ISO1044ADR, ISO1044DR and ISO1042DR chips. -
Features
ISO1044BDR is a 2.5 V, 1 μA, 40 nA IQ, dual output, 75 mA low-dropout voltage regulator with power-good output, voltage monitor, and reset capability. It has high PSRR and low noise. -
Pinout
The ISO1044BDR has a pin count of 20 and is a digital isolator with four channels providing galvanic isolation for Serial Peripheral Interface (SPI) communication. It is designed to transfer data between isolated circuits in high-noise environments. -
Manufacturer
The manufacturer of the ISO1044BDR is Texas Instruments. Texas Instruments is a semiconductor design and manufacturing company that specializes in developing analog and digital chips for a variety of industries, including consumer electronics, automotive, and industrial applications. -
Application Field
ISO1044BDR is a precision sensor amplifier used in industrial applications requiring accurate voltage or current signal conditioning. It is commonly used in process control, automation, robotics, and test and measurement equipment to amplify and condition sensor signals for reliable and accurate data acquisition. -
Package
The ISO1044BDR chip comes in a Small Outline Integrated Circuit (SOIC) package type with a form of surface mount. The size of the chip is 8-SOIC, which indicates 8 pins in a Small Outline package.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증