Microchip DSPIC33FJ256MC710-I/PF
MCU 16-bit dsPIC RISC 256KB Flash 3.3V 100-Pin TQFP Tray / IC MCU 16BIT 256KB FLASH 100TQFP
브랜드: Microchip Technology, Inc
제조업체부품 #: DSPIC33FJ256MC710-I/PF
데이터 시트: DSPIC33FJ256MC710-I/PF Datasheet (PDF)
패키지/케이스: TQFP-100
상품 유형: 내장형 프로세서 및 컨트롤러
DSPIC33FJ256MC710-I/PF 일반적인 설명
IC, 16BIT MCU-DSP, 256KB FLASH, SMD; Product Range: dsPIC33F Series; Core Frequency: 40MHz; Flash Memory Size: 256KB; No. of I/O's: 85I/O's; Embedded Interface Type: ECAN, I2C, SPI, UART; Core Supply Voltage: 2.75V; DSC Case S
특징
- Operating Conditions
- 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
- 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
- Qualification and Class B Support
- AEC-Q100 REVG (Grade 1 -40ºC to +125ºC)
- AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
- Class B Safety Library, IEC 6073
- Core: 16-bit dsPIC33F CPU
- Code-efficient (C and Assembly) architecture
- Two 40-bit wide accumulators
- Single-cycle (MAC/MPY) with dual data fetch
- Single-cycle mixed-sign MUL plus hardware divide
- Clock Management
- Programmable PLLs and oscillator clock sources
- Fail-Safe Clock Monitor (FSCM)
- Independent Watchdog Timer (WDT)
- Fast wake-up and start-up
- Power Management
- Low-power management modes (Sleep, Idle,Doze)
- Integrated Power-on Reset and Brown-out Reset
- 1.35 mA/MHz dynamic current (typical)
- 55 μA IPD current (typical)
- Motor Control PWM
- Up to four PWM generators with eight outputs
- Dead Time for rising and falling edges
- 12.5 ns PWM resolution
- PWM support for Motor Control: BLDC, PMSM, ACIM and SRM
- Programmable Fault inputs
- Flexible trigger for ADC conversions and configurations
- Advanced Analog Features
- Two ADC modules
- Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit,500 ksps with one S&H
- 18 analog inputs on 64-pin devices and up to
- 32 analog inputs on 100-pin devices
- Flexible and independent ADC trigger sources
- Timers/Output Compare/Input Capture
- Up to nine 16-bit timers/counters. Can pair up to make four 32-bit timers
- Eight Output Compare modules configurable as
- timers/counters
- Eight Input Capture modules
- Communication Interfaces
- Two UART modules (10 Mbps)
- Support for LIN 2.0 protocols and IrDA®
- Two 4-wire SPI modules (15 Mbps)
- Up to two I2C™ modules (up to 1 Mbaud) with SMBus support
- Up to two Enhanced CAN (ECAN) modules (1 Mbaud) with 2.0B support
- Quadrature Encoder Interface (QEI) module
- Data Converter Interface (DCI) module with I2S codec support
- Input/Output
- 5V-tolerant pins
- Selectable open drain, pull-ups, and pull-downs
- Up to 5 mA overvoltage clamp current
- External interrupts on all I/O pins
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Manufacturer | Microchip Technology | Product Category | Embedded - Microcontrollers |
Series | dsPIC 33F | Packaging | Tray Alternate Packaging |
Package-Case | 100-TQFP | Operating-Temperature | -40°C ~ 85°C (TA) |
Supplier-Device-Package | 100-TQFP (14x14) | Number-of-I-O | 85 |
Speed | 40 MIPs | EEPROM-Size | - |
Core-Processor | dsPIC | RAM-Size | 30K x 8 |
Program-Memory-Type | FLASH | Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT |
Connectivity | CAN, I2C, IrDA, LIN, SPI, UART/USART | Voltage-Supply-Vcc-Vdd | 3 V ~ 3.6 V |
Core-Size | 16-Bit | Program-Memory-Size | 256KB (256K x 8) |
Data-Converters | A/D 24x10b/12b | Oscillator-Type | Internal |
Tags | dsPIC33FJ256MC710-I, dsPIC33FJ256MC7, dsPIC33FJ256M, dsPIC33FJ2, dsPIC33FJ, dsPIC33F, dsPIC33, dsPIC3, dsPIC, dsPI, DSP | Mfr | Microchip Technology |
Package | Tray | Product Status | Active |
Programmabe | Verified | Core Processor | dsPIC |
Core Size | 16-Bit | Number of I/O | 85 |
Program Memory Size | 256KB (256K x 8) | Program Memory Type | FLASH |
EEPROM Size | - | RAM Size | 30K x 8 |
Voltage - Supply (Vcc/Vdd) | 3V ~ 3.6V | Data Converters | A/D 24x10/12b |
Oscillator Type | Internal | Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount | Package / Case | 100-TQFP |
Supplier Device Package | 100-TQFP (14x14) |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The dsPIC33FJ256MC710-I/PF is a high-performance 16-bit microcontroller from Microchip Technology. It features a 16-bit data path, 40 MIPS performance, up to 256 KB of flash memory, and a variety of communication peripherals. The chip is commonly used in embedded control applications requiring high performance and digital signal processing capabilities.
-
Equivalent
Some equivalent products of DSPIC33FJ256MC710-I/PF chip are DSPIC33FJ256MC710A-I/PF and DSPIC33FJ256MC710T-I/PF. They are also part of the dsPIC33FJ series of 16-bit microcontrollers from Microchip Technology. -
Features
Some features of DSPIC33FJ256MC710-I/PF include 16-bit MCU/DSP core, 16 KB RAM, 256 KB Flash memory, 16-bit ADC, and motor control peripherals. It also has integrated communication peripherals like UART, SPI, and I2C, making it suitable for advanced embedded control applications. -
Pinout
The DSPIC33FJ256MC710-I/PF is a 64-pin microcontroller with enhanced features for digital signal processing. It features 256 KB of flash memory, 30 KB of RAM, and multiple communication interfaces. The pins serve various functions including GPIO, PWM, ADC, SPI, I2C, UART, and more for a wide range of applications. -
Manufacturer
The manufacturer of the DSPIC33FJ256MC710-I/PF is Microchip Technology Inc. It is an American semiconductor company that specializes in microcontroller, mixed-signal, and analog semiconductors. It is known for providing solutions for a wide range of applications in various industries including automotive, industrial, consumer, and communication sectors. -
Application Field
The DSPIC33FJ256MC710-I/PF is commonly used in motor control, power management, and digital power supply applications. Its high performance and integrated peripherals make it ideal for applications requiring precise control and monitoring of power systems, such as electric vehicles, industrial automation, and renewable energy systems. -
Package
The DSPIC33FJ256MC710-I/PF chip is available in a 64-pin TQFP (Thin Quad Flat Package) package. The form of the chip is surface mount. The size of the package is 10mm x 10mm.
데이터 시트 PDF
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증
Good pricing, but some of the components were not as durable as expected.