이 웹사이트는 쿠키를 사용합니다. 이 사이트를 이용함으로써 귀하는 쿠키 사용에 동의하게 됩니다. 자세한 내용은 다음을 참조하세요. 개인 정보 정책.

이미지는 참고용입니다. 제품 사양 보기

Microchip DSPIC33FJ256GP710-I/PF

Name: DSPIC33FJ256GP710-I/PF
Rating: 4.5 (5 reviews)

MCU 16-bit dsPIC RISC 256KB Flash 3.3V 100-Pin TQFP Tray

브랜드: Microchip Technology, Inc

제조업체부품 #: DSPIC33FJ256GP710-I/PF

데이터 시트: DSPIC33FJ256GP710-I/PF Datasheet (PDF)

패키지/케이스: TQFP-100

상품 유형: 내장형 프로세서 및 컨트롤러

RoHS 상태:

재고상태: 2752 PC, 새로운 원본

Warranty: 1 Year Ovaga Warranty - Find Out More

BOM에 추가

빠른 견적

다음에 대한 RFQ를 제출해 주십시오. DSPIC33FJ256GP710-I/PF 또는 우리에게 이메일을 보내: 이메일: [email protected], 12시간 이내에 연락드리겠습니다.

수량^*

이메일^*

담당자 이름^*

회사

주목

DSPIC33FJ256GP710-I/PF 일반적인 설명

Digital Signal Controller-Dsc, 16 Bit 256Kb 40Mhz 3.6V Tqfp-100; Product Range:Dspic33F Series; Core Frequency:40Mhz; Flash Memory Size:256Kb; No. Of I/O S:85I/O S; Embedded Interface Type:Dci, Ecan, I2C, Spi, Uart; Adc Channels:32 Rohs Compliant: Yes |Microchip DSPIC33FJ256GP710-I/PF

특징

Operating Conditions
Up to 40 MIPS operation
3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
High-performance dsPIC33F core
Code-efficient (C and Assembly) architecture
Two 40-bit wide accumulators
Single-cycle (MAC/MPY) with dual data fetch
Single-cycle mixed-sign MUL plus hardware divide
Clock Management
Programmable PLLs and oscillator clock sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer (WDT)
Fast wake-up and start-up
Power Management
Low-power management modes (Sleep, Idle, Doze)
Integrated Power-on Reset and Brown-out Reset
2.1 mA/MHz dynamic current (typical)
50 μA IPD current (typical)
Advanced Analog Features
Two ADC modules: - Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H - 18 analog inputs on 64-pin devices and up to 32 analog inputs on 100-pin devices
Flexible and independent ADC trigger sources
Timers/Output Compare/Input Capture
Up to nine 16-bit timers/counters (Can pair up to make four 32-bit timers)
Eight Output Compare modules configurable as timers/counters
Eight Input Capture modules Communication Interfaces
Two UART modules (10 Mbps) - With support for LIN 2.0 protocols and IrDA®
Two 4-wire SPI modules (15 Mbps)
Up to two I2C™ modules (up to 1 Mbaud) with SM Bus support
Up to two Enhanced CAN (ECAN) modules (1 Mbaud) with CAN 2.0B support
Data Converter Interface (DCI) module with I2S codec support
Input/Output
Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for non-standard VOH1
5V-tolerant pins
Selectable open drain, pull-ups, and pull-downs
Up to 5 mA overvoltage clamp current
External interrupts on all I/O pins
Debugger Development Support
In-circuit and in-application programming
Two program and two complex data breakpoints
IEEE 1149.2-compatible (JTAG) boundary scan
Trace and run-time watch

명세서

매개변수	값	매개변수	값
Manufacturer	Microchip	Product Category	Embedded - Microcontrollers
Series	dsPIC 33F	Packaging	Tray Alternate Packaging
Package-Case	100-TQFP	Operating-Temperature	-40°C ~ 85°C (TA)
Supplier-Device-Package	100-TQFP (14x14)	Number-of-I-O	85
Speed	40 MIPs	EEPROM-Size	-
Core-Processor	dsPIC	RAM-Size	30K x 8
Program-Memory-Type	FLASH	Peripherals	AC'97, Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT
Connectivity	CAN, I2C, IrDA, LIN, SPI, UART/USART	Voltage-Supply-Vcc-Vdd	3 V ~ 3.6 V
Core-Size	16-Bit	Program-Memory-Size	256KB (256K x 8)
Data-Converters	A/D 32x10b/12b	Oscillator-Type	Internal
Tags	dsPIC33FJ256GP710-I/P, dsPIC33FJ256GP710-I, dsPIC33FJ256GP7, dsPIC33FJ256G, dsPIC33FJ2, dsPIC33FJ, dsPIC33F, dsPIC33, dsPIC3, dsPIC, dsPI, DSP

배송

	배송비	리드타임
DHL	$20.00-$40.00 (0.50 KG)	2-5 날
페덱스	$20.00-$40.00 (0.50 KG)	2-5 날
UPS	$20.00-$40.00 (0.50 KG)	2-5 날
TNT	$20.00-$40.00 (0.50 KG)	2-5 날
EMS	$20.00-$40.00 (0.50 KG)	2-5 날
등기 항공 우편	$20.00-$40.00 (0.50 KG)	2-5 날

처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.

지불

지불 조건		핸드 수수료
	은행 송금	US$30.00의 은행 수수료를 부과합니다.
	페이팔	4.0%의 서비스 수수료를 부과합니다.
	신용 카드	3.5% 서비스 수수료를 부과합니다.
	웨스턴 유니언	charge US.00 banking fee.
	돈 그램	US$0.00의 은행 수수료를 부과합니다.

보증

1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.

2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.

포장

단계1 :제품
단계2 :진공 포장
단계3 :정전기 방지 가방
단계4 :개별 포장
단계5 :포장 상자
단계6 :바코드 배송 태그

모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.

외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.

우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.

모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.

부품 포인트

The dsPIC33FJ256GP710-I/PF is a 16-bit microcontroller from Microchip Technology featuring a high performance DSP core with integrated peripherals for advanced control applications. It offers high processing speed, reduced power consumption, and a variety of communication interfaces.
Equivalent

Some equivalent products of DSPIC33FJ256GP710-I/PF chip are DSPIC33FJ256GP710-I/PF, DSPIC33FJ128GP710-I/PF, and DSPIC33FJ64GP710-I/PF. These chips are part of the dsPIC33F series from Microchip Technology and offer similar performance and features.
Features

1. 16-bit microcontroller with up to 40 MIPS performance 2. 256 KB Flash memory, 16 KB RAM 3. Integrated peripherals including ADC, DAC, UART, and PWM 4. USB interface, CAN communication 5. Operating voltage range of 2.5V to 3.6V 6. Operating temperature range of -40°C to 125°C
Pinout

The DSPIC33FJ256GP710-I/PF has 100 pins and functions as a powerful 16-bit digital signal controller with advanced analog and digital peripherals for a wide range of applications including motor control, power supply management, and sensor processing.
Manufacturer

The manufacturer of the DSPIC33FJ256GP710-I/PF is Microchip Technology Inc. Microchip Technology is an American company that produces embedded control solutions for a variety of applications in sectors such as automotive, industrial, consumer, and computing. It specializes in the design and manufacture of microcontrollers, microprocessors, and other integrated circuits.
Application Field

The DSPIC33FJ256GP710-I/PF is commonly used in industrial automation, motor control, power management, and medical devices due to its high-performance digital signal processing capabilities and integrated peripherals for control applications that require precise timing and control accuracy.
Package

The DSPIC33FJ256GP710-I/PF chip comes in a 64-pin TQFP (Thin Quad Flat Package) form factor with a size of 10mm x 10mm.