주문 금액이
$5000Microchip DSPIC33EV256GM106-I/MR
dsPIC33EV256GM106-I/MR: A 16-bit Microcontroller with CISC Architecture, 256KB Flash Memory, 5V Voltage, and Packaged in a 64-Pin QFN EP Tube
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
브랜드: Microchip
제조업체부품 #: DSPIC33EV256GM106-I/MR
데이터 시트: DSPIC33EV256GM106-I/MR 데이터 시트 (PDF)
패키지/케이스: QFN-64
상품 유형: Microcontrollers
DSPIC33EV256GM106-I/MR 일반적인 설명
For those working on safety-critical designs, the dsPIC33EVXXXGM00X/10X family offers functional safety features to simplify ISO 26262 compliance. This includes a Functional Safety Manual, FMEDA report, and access to the MPLAB XC16 Functional Safety Compiler. With Microchip's focus on functional safety, designers can feel confident in the reliability and robustness of their systems. Whether you're working in automotive, industrial, consumer, or medical settings, the dsPIC33EV family delivers high-performance, precision control for a variety of applications. Take advantage of Microchip's functional safety capabilities to ensure your designs meet the highest standards of safety and reliability
특징
- Operating Conditions
- 4.5V to 5.5V, -40ºC to +85ºC, DC to 70 MIPS
- 4.5V to 5.5V, -40ºC to +125ºC, DC to 60 MIPS
- 4.5V to 5.5V, -40ºC to +150ºC, DC to 40 MIPS
- dsPIC33E Core
- Code-Efficient (C and Assembly) Architecture
- Two 40-Bit Wide Accumulators
- Single-Cycle (MAC/MPY) with Dual Data Fetch
- Single-Cycle, Mixed-Sign MUL plus Hardware Divide
- 32-Bit Multiply Support
- Provides a boot Flash segment in addition to the existing general Flash segment
- Error Code Correction (ECC) for Flash
- Added Two Alternate Register Sets for Fast Context Switching
- Up to Six Pulse-Width Modulation (PWM) Outputs (three generators)
- High-Speed PWM
- Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources
- Dead Time for Rising and Falling Edges
- 8.3 ns PWM Resolution at 60 MIPS,
- 16.6 ns Center-Aligned mode at 60 MIPS
- PWM support DC/DC, AC/DC, inverters, Power Factor Correction (PFC) and lighting
- PWM support Brushless Direct Current (BLDC), Permanent Magnet Synchronous Motor (PMSM), AC Induction Motor (ACIM), Switched Reluctance Motor (SRM)
- Programmable Fault inputs
- Flexible trigger configurations for Analog-to-Digital conversion
- Independent Time Base
- Supports PWM lock, PWM output chopping and dynamic phase shifting
- Integrated Analog Features
- ADC configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
- Up to 36 analog inputs
- Flexible and Independent ADC Trigger Sources
- Up to Four Op Amp/Comparators with Direct Connection to the ADC module:
- Additional dedicated comparator and 7-bit Digital-to-Analog Converter (DAC)
- Programmable references with 128 voltage points
- Programmable blanking and filtering
- Charge Time Measurement Unit
- Supports mTouch™ capacitive touch sensing
- Provides high-resolution time measurement (1 ns)
- On-chip temperature measurement
- Temperature sensor diode
- Multiple sources of edge input triggers
- Timers/Output Compare/Input Capture
- Up to nine general purpose timers
- Five 16-bit or up to two 32-bit timers/counters, Timer3 can provide ADC trigger
- Oscillator Frequency Monitoring through CTMU
- Four Output Capture modules configurable as timers/counters
- Four Input Capture modules
- Communication Interfaces
- CAN module with 32 buffers, 16 filters and three masks
- Support for LIN/J2602 bus support and IrDA®
- High and low speed (SCI)
- 25 Mbps data rate without PPS used
- One I2C™ module (up to 1 Mbaud) with SMBus Support
- Two SENT J2716 (Single Edge Nibble Transmission-Transmit/Receive) module for Automotive Applications
- Direct Memory Access (DMA)
- 4-Channel DMA with User-Selectable Priority Arbitration
- Universal Asynchronous Receiver/Transmitter (UART), Serial Peripheral Interface (SPI), ADC, Input Capture, Output Compare
- Qualification and Class B Support
- AEC-Q100 Grade 1 (-40ºC to +125ºC)
- AEC-Q100 Grade 0 (-40ºC to +150ºC)
- Class B Safety Library, IEC 60730
- Functional Safety support (ISO26262)
- ASIL-B focused applications
- FMEDA and Safety manual
- XC16 Functional Safety Compiler
- Functional Safety hardware features
- Flash with Error Correction Code (ECC)
- CodeGuard™ Memory Protection
- On-chip Regulator for CPU
- Backup FRC and redundant clock sources
- Fail Safe Clock Monitor
- Windowed Watchdog Timer (WDT)
- Windowed Deadman Timer (DMT)
- Oscillator Frequency Monitoring through CTMU (OSCI, SYSCLK, FRC, BFRC, LPRC)
- BOR and POR
- Cyclical Redundancy Check (CRC)
- Analog peripherals redundancies
- Illegal Opcode Detection
- PWM Lock and Dedicated PWM Fault Pin
- Internal Loopback to test communication peripherals and IO ports
- SFR and Configuration Locks
- Math Error Trap
- Address Trap
- Redundant data storage for Flash-based Configuration bits and Peripheral Pin Select (PPS) Configuration bits
![Microchip Inventory Microchip Inventory](/files/uploads/inventory/MICROCHIP/MICROCHIP.jpg)
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Manufacturer: | Microchip | Product Category: | Digital Signal Processors & Controllers - DSP, DSC |
RoHS: | Details | Product: | DSCs |
Series: | dsPIC33EV256GM106 | Tradename: | dsPIC |
Mounting Style: | SMD/SMT | Package / Case: | QFN-64 |
Core: | dsPIC33E | Number of Cores: | 1 Core |
Maximum Clock Frequency: | 70 MHz | L1 Cache Instruction Memory: | - |
L1 Cache Data Memory: | - | Program Memory Size: | 256 kB |
Data RAM Size: | 16 kB | Operating Supply Voltage: | 4.5 V to 5.5 V |
Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 85 C |
Qualification: | AEC-Q100 | Packaging: | Tube |
ADC Resolution: | 10 bit, 12 bit | Brand: | Microchip Technology |
Data Bus Width: | 16 bit | Instruction Type: | Fixed/Floating Point |
Interface Type: | Serial | Moisture Sensitive: | Yes |
Number of I/Os: | 53 I/O | Number of Timers/Counters: | 7 Timer |
Processor Series: | dsPIC33E | Product Type: | DSP - Digital Signal Processors & Controllers |
Program Memory Type: | Flash | Factory Pack Quantity: | 40 |
Subcategory: | Embedded Processors & Controllers | Supply Voltage - Max: | 5.5 V |
Supply Voltage - Min: | 4.5 V | Watchdog Timers: | Watchdog Timer |
Unit Weight: | 0.007277 oz |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증