주문 금액이
$5000SPANSION AM29LV017D
16 Megabit (2 M x 8-Bit) CMOS 3.0 Volt-only Uniform Sector Flash Memory
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
브랜드: SPANSION
제조업체부품 #: AM29LV017D
데이터 시트: AM29LV017D 데이터 시트 (PDF)
패키지/케이스: FBGA48
상품 유형: Flash Memories
AM29LV017D 일반적인 설명
GENERAL DESCRIPTIONThe Am29LV017D is a 16 Mbit, 3.0 Volt-only Flash memory organized as 2,097,152 bytes. The device is offered in 48-ball FBGA and 40-pin TSOP packages. The byte-wide (x8) data appears on DQ7–DQ0. All read, program, and erase operations are accomplished using only a single power supply. The device can also be programmed in standard EPROM programmers.DISTINCTIVE CHARACTERISTICS■ Single power supply operation — 2.7 to 3.6 volt read and write operations for battery-powered applications■ Manufactured on 0.23 µm process technology — Compatible with and replaces Am29LV017B device■ High performance — Access times as fast as 70 ns■ Ultra low power consumption (typical values at 5 MHz) — 200 nA Automatic Sleep mode current — 200 nA standby mode current — 9 mA read current — 15 mA program/erase current■ Flexible sector architecture — Thirty-two 64 Kbyte sectors — Supports full chip erase — Sector Protection features: A hardware method of locking a sector to prevent any program or erase operations within that sector Sectors can be locked in-system or via programming equipment Temporary Sector Unprotect feature allows code changes in previously locked sectors■ Unlock Bypass Program Command — Reduces overall programming time when issuing multiple program command sequences■ Embedded Algorithms — Embedded Erase algorithm automatically preprograms and erases the entire chip or any combination of designated sectors — Embedded Program algorithm automatically writes and verifies data at specified addresses■ Minimum 1,000,000 write cycle guarantee per sector■ 20-year data retention at 125°C — Reliable operation for the life of the system■ Package option — 48-ball FBGA — 40-pin TSOP■ CFI (Common Flash Interface) compliant — Provides device-specific information to the system, allowing host software to easily reconfigure for different Flash devices■ Compatibility with JEDEC standards — Pinout and software compatible with single power supply Flash — Superior inadvertent write protection■ Data# Polling and toggle bits — Provides a software method of detecting program or erase operation completion■ Ready/Busy# pin (RY/BY#) — Provides a hardware method of detecting program or erase cycle completion■ Erase Suspend/Erase Resume — Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation■ Hardware reset pin (RESET#) — Hardware method to reset the device to reading array data■ Command sequence optimized for mass storage — Specific address not required for unlock cycles
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Case/Package | TSOP | Mount | Surface Mount |
Number of Pins | 40 | Access Time | 90 ns |
Address Bus Width | 21 b | Density | 16 Mb |
Interface | Parallel | Max Operating Temperature | 85 °C |
Max Supply Voltage | 3.6 V | Memory Type | NOR |
Min Operating Temperature | -40 °C | Min Supply Voltage | 2.7 V |
Nominal Supply Current | 16 mA | Operating Supply Voltage | 3.3 V |
Sync/Async | Asynchronous |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증