주문 금액이
$5000TI TXS0102DCUTG4
Voltage Level Translator Bidirectional 1 Circuit 2 Channel 24Mbps 8-VSSOP
브랜드: TI
제조업체부품 #: TXS0102DCUTG4
데이터 시트: TXS0102DCUTG4 데이터 시트 (PDF)
패키지/케이스: VSSOP (DCU)-8
상품 유형: Translation - Voltage Levels
TXS0102DCUTG4 일반적인 설명
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the V CCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the V CCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
특징
- No direction-control signal needed
- Maximum data rates:
- 24 Mbps (push pull)
- 2 Mbps (open drain)
- Available in the Texas Instruments NanoStar™ integrated circuit package
- 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (V CCA ≤ V CCB)
- V CC isolation feature: if either V CC input is at GND, both ports are in the High-Impedance state
- No power-supply sequencing required: either V CCA or V CCB can be ramped first
- I off supports partial-power-down mode operation
- Latch-up performance exceeds 100 mA per JESD 78, Class II
- ESD protection exceeds JESD 22:
- A port:
- 2500-V Human-Body Model (A114-B)
- 250-V Machine Model (A115-A)
- 1500-V Charged-Device Model (C101)
- B port:
- 8-kV Human-Body Model (A114-B)
- 250-V Machine Model (A115-A)
- 1500-V Charged-Device Model (C101)
- A port:
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Technology family | TXS | Applications | I2C, MDIO |
Bits (#) | 2 | Data rate (max) (MBps) | 24 |
High input voltage (min) (V) | 1.45 | High input voltage (max) (V) | 5.5 |
Vout (min) (V) | 1.65 | Vout (max) (V) | 5.5 |
IOH (max) (mA) | 0 | IOL (max) (mA) | 0 |
Supply current (max) (µA) | 10 | Features | Edge rate accelerator, Output enable, Partial power down (Ioff), Vcc isolation |
Input type | Transmission Gate | Output type | 3-State, Transmission Gate |
Rating | Catalog |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The TXS0102DCUTG4 chip is a voltage level translator designed to convert signals between different voltage domains. It supports bidirectional translation, making it suitable for communication protocols and interfaces that operate at different voltage levels. The chip offers low power consumption, a small footprint, and can be used in a wide range of applications where voltage level translation is required.
-
Equivalent
Some equivalent products of the TXS0102DCUTG4 chip include SN74LVC2T45, SN74LVC2T45DCT, and 74LVC2T45. -
Features
The TXS0102DCUTG4 is a dual supply voltage level translator with autonomous bidirectional operation and supports data rates up to 100 Mbps. It features ultra-low static power consumption and is designed to provide voltage level shifting between 2.0V to 3.6V and 1.0V to 3.6V signals. -
Pinout
The TXS0102DCUTG4 is a dual non-inverting bidirectional level shifter with an input/output pin count of 8. It is commonly used for voltage level translation between different logic levels in electronic devices, such as microcontrollers and sensors. -
Manufacturer
The manufacturer of the TXS0102DCUTG4 is Texas Instruments. Texas Instruments is a multinational semiconductor company that designs and manufactures semiconductors, integrated circuits, and other electronic devices. They are known for their wide range of products used in various industries such as automotive, industrial, and consumer electronics. -
Application Field
The TXS0102DCUTG4 is a 2-bit bidirectional voltage-level translator and can be used in various applications such as I2C and SPI interfaces, level shifting between different logic voltage levels, and voltage translation in mixed voltage systems. -
Package
The TXS0102DCUTG4 chip comes in a small package type called VSSOP. It has a form factor with a fine pitch, making it compact and suitable for space-constrained applications. The size of the chip is approximately 2.3 mm x 3 mm.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증