주문 금액이
$5000TI TLE2061CP
Operational Amplifiers - Op Amps Low Power JFET
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
TLE2061CP 일반적인 설명
The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise floor than the TL06x and TL03x. On-chip zener trimming of offset voltage yields precision grades for dc-coupled applications. The TL206x devices are pin-compatible with other TI BiFETs; they can be used to double the bandwidth of TL06x and TL03x circuits, or to reduce power consumption of TL05x, TL07x, and TL08x circuits by nearly 90%.
BiFET operational amplifiers offer the inherently-higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or very low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption. The TLE206x family features a high-output-drive circuit capable of driving 100- loads at supplies as low as ±5 V. This makes them uniquely suited for driving transformer loads in modems and other applications requiring good ac characteristics, low power, and high output drive.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.
The TLE206x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of operational amplifiers (TLC- and TLV-prefixes) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth requirements, and output loading. The Texas Instrument TLV2432 and TLV2442 CMOS operational amplifiers are excellent choices to consider.
특징
- 2× Bandwidth (2 MHz) of the TL06x and TL03x Operational Amplifiers
- Low Supply Current . 290 µA/Ch Typ
- On-chip Offset Voltage Trimming for Improved DC Performance
- High Output Drive, Specified into 100- Loads
- Lower Noise Floor Than Earlier Generations of Low-Power BiFETs
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Operational Amplifiers - Op Amps |
RoHS | Details | Mounting Style | Through Hole |
Package / Case | PDIP-8 | Number of Channels | 1 Channel |
Supply Voltage - Max | 36 V | GBP - Gain Bandwidth Product | 2 MHz |
Output Current per Channel | 45 mA | SR - Slew Rate | 3.4 V/us |
Vos - Input Offset Voltage | 3.1 mV | Supply Voltage - Min | 7 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Ib - Input Bias Current | 2 nA | Operating Supply Current | 280 uA |
Shutdown | No Shutdown | CMRR - Common Mode Rejection Ratio | 82 dB |
en - Input Voltage Noise Density | 40 nV/sqrt Hz | Series | TLE2061 |
Amplifier Type | Low Power Amplifier | Brand | Texas Instruments |
Dual Supply Voltage | +/- 5 V, +/- 9 V, +/- 12 V, +/- 15 V | Height | 4.57 mm |
In - Input Noise Current Density | 0.001 pA/sqrt Hz | Input Type | Rail-to-Rail |
Length | 9.81 mm | Maximum Dual Supply Voltage | +/- 18 V |
Minimum Dual Supply Voltage | +/- 3.5 V | Operating Supply Voltage | +/- 3.5 V to +/- 18 V |
Product | Operational Amplifiers | Product Type | Op Amps - Operational Amplifiers |
Factory Pack Quantity | 50 | Subcategory | Amplifier ICs |
Supply Type | Dual | Technology | BiFET |
Vcm - Common Mode Voltage | Negative Rail + 4 V to Positive Rail - 2 V | Voltage Gain dB | 98.06 dB |
Width | 6.35 mm |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증