ST STM32F103V8T6
ARM Microcontrollers - MCU 32BIT Cortex M3 64KB 20KB RAM 2X12 ADC
제조업체부품 #: STM32F103V8T6
데이터 시트: STM32F103V8T6 Datasheet (PDF)
패키지/케이스: LQFP-100
상품 유형: 내장형 프로세서 및 컨트롤러
STM32F103V8T6 일반적인 설명
The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.These features make the STM32F103xx medium-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, video intercoms, and HVACs.Evaluation board with STM32F103Zx MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.STM32 Nucleo-64 development board with STM32F103.
특징
- ARM®32-bit Cortex®-M3 CPU Core
- 72 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 64 or 128 Kbytes of Flash memory
- 20 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low-power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 2 x 12-bit, 1 μs A/D converters (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Dual-sample and hold capability
- Temperature sensor
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- Up to 80 fast I/O ports
- 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- 7 timers
- Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 16-bit, motor control PWM timer with dead-time generation and emergency stop
- 2 watchdog timers (Independent and Window)
- SysTick timer 24-bit downcounter
- Up to 9 communication interfaces
- Up to 2 x I2C interfaces (SMBus/PMBus)
- Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- Up to 2 SPIs (18 Mbit/s)
- CAN interface (2.0B Active)
- USB 2.0 full-speed interface
- CRC calculation unit, 96-bit unique ID
- Packages are ECOPA
애플리케이션
- Industrial control systems
- Home automation
- Internet of Things (IoT) devices
- Motor control
- Sensor data acquisition and processing
- Embedded systems
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Product Name | STM32F103V8T6 | Product Type | Microcontroller |
Manufacturer | STMicroelectronics | Series | STM32F1 Series |
Core Processor | ARM Cortex-M3 | Core Size | 32-Bit |
Speed | 72MHz | Connectivity | CAN, I²C, SPI, USART, USB |
Peripherals | ADC, DAC, DMA, RTC, TIM, PWM | Number of I/Os | 33 |
Program Memory Size | 64KB (64K x 8) | Data RAM Size | 20KB |
Voltage - Supply | 2.0 V ~ 3.6 V | Operating Temperature | -40°C ~ 85°C |
Mounting Type | Surface Mount |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
등가 부품
에 대한 STM32F103V8T6 구성 요소인 경우 이러한 교체 및 대체 부품을 고려할 수 있습니다.:
부품 번호
브랜드
패키지
설명
부품 번호 : STM32F103C8T6
브랜드 :
패키지 :
설명 : STM32F103C8T6: Another variant of the STM32F1 series with similar specifications.
부품 번호 : STM32F103VET6
브랜드 :
패키지 :
설명 : STM32F103VET6: A higher-end variant with more flash memory and RAM.
부품 포인트
-
The STM32F103V8T6 chip is a microcontroller based on the arm cortex-m3 architecture. it features a high-performance 32-bit core running at up to 72mhz, with various integrated peripherals such as gpio, timers, uart, spi, i2c, and adc. it also has a generous amount of flash memory (up to 128kb) and ram (up to 20kb), making it suitable for a wide range of embedded applications.
-
Equivalent
Some equivalent products of the STM32F103V8T6 chip include the stm32f103c8t6, stm32f103vct6, and stm32f103rbt6. they are part of the same stm32f103 series and have similar features and specifications. -
Features
The STM32F103V8T6 microcontroller features arm cortex-m3 core, a clock speed of up to 72 mhz, 64 kb of flash memory, 20 kb of sram, 37 general-purpose i/o pins, and a wide range of peripherals including timers, uart, spi, i2c interfaces, and adc. -
Pinout
The STM32F103V8T6 microcontroller has 64 pins. the pins serve various functions including gpio (general purpose input output), timers, uart (universal asynchronous receiver transmitter), spi (serial peripheral interface), i2c (inter-integrated circuit) communication, adc (analog to digital converter), and more. -
Manufacturer
Stmicroelectronics is the manufacturer of the STM32F103V8T6. it is a global semiconductor company, specializing in developing and manufacturing a wide range of integrated circuit products for a variety of applications. -
Application Field
The STM32F103V8T6 is a microcontroller commonly used in applications such as industrial automation, consumer electronics, and home appliances. it is ideal for projects requiring process control, sensor interfacing, data logging, and communication protocols. its advanced features and compatibility with various software development tools make it a popular choice for embedded system design. -
Package
The STM32F103V8T6 chip comes in a lqfp (low-profile quad flat package) package type. it has 48 pins and a size of 7mm x 7mm.
데이터 시트 PDF
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증
The product arrived promptly and was exactly as described.