주문 금액이
$5000STK672-600
Efficient Motor Control System for Precise Motion in Both Full and Half Steps
브랜드: onsemi
제조업체부품 #: STK672-600
데이터 시트: STK672-600 데이터 시트 (PDF)
패키지/케이스: ZIP-19
RoHS 상태:
재고상태: 8,168 PC, 새로운 원본
상품 유형: Motor Drivers, Controllers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*모든 가격은 USD 단위입니다.
수량 | 단가 | 추가 가격 |
---|---|---|
1 | $4.963 | $4.963 |
200 | $1.921 | $384.200 |
500 | $1.853 | $926.500 |
1000 | $1.820 | $1820.000 |
재고: 8,168 PCS
STK672-600 일반적인 설명
STK672-600 is a cutting-edge stepping motor driver IC that boasts a plethora of impressive features tailored for high-output stepping motors. Its all-in-one package includes a power supply circuit, current detection resistors, and powerful power MOSFETs, ensuring a compact design that is both efficient and user-friendly. With the capability to drive a two-phase bipolar stepping motor with up to 50V and 5.0A peak current per phase, this IC is a versatile solution for a wide range of applications
특징
- The motor speed can be controlled by the frequency of an external clock signal.
- 2-phase excitation or 1-2 phase excitation is selected according to switching the state of the MODE1 pin (low or high).
- The excitation mode is set at the rising edge of the clock signal when the MODE2 pin is high, or at the rising edge or falling edge when the MODE2 pin is low.
- The phase is maintained even if the excitation mode is switched in the middle of operation.
- The direction of rotation can be changed by applying a high or low signal to the CWB pin used to select the direction of rotation.
- Supports schmitt input for 2.5V high level input.
- Incorporating a current detection resistor (0.141Ω: resistor tolerance ±2%), motor current can be set using two
- external resistors.
- Equipped with an ENABLE pin that, during clock input, allows motor output to be cut-off and resumed later while maintaining the same excitation timing.
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Package | Bulk | Product Status | Obsolete |
Motor Type - Stepper | Unipolar | Function | Driver - Fully Integrated, Control and Power Stage |
Output Configuration | Half Bridge (2) | Interface | Parallel |
Technology | Power MOSFET | Step Resolution | 1, 1/2 |
Applications | General Purpose | Current - Output | 2.2A |
Voltage - Supply | 4.75V ~ 5.25V | Voltage - Load | 10V ~ 42V |
Operating Temperature | 0°C ~ 105°C (TC) |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증