주문 금액이
$5000ST ST8024CDR
Smart Card Reader, Writer Interface 28-SO
브랜드: ST
제조업체부품 #: ST8024CDR
데이터 시트: ST8024CDR 데이터 시트 (PDF)
패키지/케이스: SOP28
RoHS 상태:
재고상태: 9,458 PC, 새로운 원본
상품 유형: Specialized
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*모든 가격은 USD 단위입니다.
수량 | 단가 | 추가 가격 |
---|---|---|
1 | $1.729 | $1.729 |
10 | $1.496 | $14.960 |
30 | $1.348 | $40.440 |
100 | $1.198 | $119.800 |
500 | $1.130 | $565.000 |
1000 | $1.101 | $1101.000 |
재고: 9,458 PCS
ST8024CDR 일반적인 설명
The ST8024CDR is a versatile and efficient solution for implementing smart card functionality in a wide range of electronic devices. Its low-cost design makes it an attractive option for manufacturers seeking to add secure data transmission capabilities to their products without breaking the bank. Whether used in smart card readers for banking transactions or identification purposes, this analog interface provides a reliable and easy-to-use solution for integrating smart card technology
특징
- 26 MHz integrated crystal oscillator
- Enhanced ESD protection on card side (> 6 kV)
- Non-inverted control of RST via pin RSTIN
- Clock generation for cards up to 20 MHz (divided by 1, 2, 4 or 8 through CLKDIV1 and CLKDIV2 signals) with synchronous frequency changes
- Supply supervisor for spike-killing during power-on and power-off and power-on reset (threshold fixed internally or externally by a resistor bridge)
- ISO 7816, GSM11.11 and EMV (payment systems) compatibility
- One multiplexed status signal off
- Built-in debounce on card presence contacts
- Thermal and short-circuit protection on all card contacts
- 3 or 5 V ± 5 % regulated card supply voltage (VCC) with appropriate decoupling has the following capabilities: Icc < 80 mA at VDDP = 4 to 6.5 V Handles current spikes of 40 nA up to 20 MHz Controls rise and fall times Filtered overload detection at approximately 120 mA
- Designed to be compatible with the NDS conditional access system
- 3 or 5 V supply for the IC (VDD and GND)
- IC card interface
- DC-DC converter for VCC generation separately powered from a 5 V ± 20% supply (VDDP and PGND)
- Automatic activation and deactivation sequences; initiated by software or by hardware in the event of a short-circuit, card take-off, overheating, VDD or VDDP drop-out
- Three specifically protected half-duplex bidirectional buffered I/O lines to card contacts C4, C7 and C8
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Supply Voltage Min Volt | 4.0 | Supply Voltage Max Volt | 6.5 |
Operating Temp Min Celsius | -25.0 | Operating Temp Max Celsius | 85.0 |
ECCN US | EAR99 | ECCN EU | NEC |
Packing Type | Tape And Reel | RoHs compliant | Ecopack1 (*) |
Grade | Industrial |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
ST8024CDR is a chip used in signal conditioning applications, specifically designed for telephone line interface circuits. It offers a wide range of functions including hybrid balance, tone ringer, supervision, line driving, and polarity reversal. This chip helps in transforming raw signals into suitable formats for transmission over telephone lines.
-
Equivalent
Equivalent products of the ST8024CDR chip include the AM26LS31CDR, SN65HVD230DR, and MAX232CDR. These chips are widely used in various applications and offer similar functionality and performance to the ST8024CDR. -
Features
The ST8024CDR is a high-speed RS-485 transceiver that offers a wide input voltage range, low supply current, and data rate up to 5 Mbps. It also includes features like thermal shutdown protection, receiver input fail-safe, and built-in ESD protection, making it suitable for industrial automation, networking, and automotive applications. -
Pinout
The ST8024CDR is a dual protocol (ISO/IEC 14443 type A/B) contactless interface IC. It features a 20-pin count and provides functions such as power supply, communication interface, and logic to communicate with ISO/IEC 14443 type A/B contactless smart cards or NFC-enabled devices. -
Manufacturer
STMicroelectronics is the manufacturer of the ST8024CDR. It is a multinational electronics and semiconductor company. -
Application Field
The ST8024CDR is a transceiver designed for isolating and conditioning digital signals in industrial applications such as motor control, power management, and process automation. It can provide reliable communication between systems operating at different voltage levels, ensuring safety and robustness in harsh environments. -
Package
The ST8024CDR chip is available in a package type called SOIC (Small Outline Integrated Circuit) with a form of 16 pins. The size of the chip in the package is 10.3mm x 7.5mm.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증