주문 금액이
$5000Microchip RN52-I/RM110
Bluetooth Modules - 802.15.1
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
브랜드: Microchip Technology, Inc
제조업체부품 #: RN52-I/RM110
데이터 시트: RN52-I/RM110 데이터 시트 (PDF)
패키지/케이스: SMD
RN52-I/RM110 일반적인 설명
The RN52 Bluetooth audio module provides a fully integrated solution for delivering high-quality stereo audio in a small form factor. It combines a Class 2 Bluetooth radio with an embedded DSP processor, controlled and configured by simple ASCII commands and GPIO. It integrates RF, a baseband controller, and DSP, making it a complete Bluetooth audio wireless link. The RN52 supports HSP/HFP, A2DP, AVRCP, SPP, and iAP profiles. The RN52 is easily integrated into any system via a simple UART interface. The module also supports Digital I/O, Stereo speaker output, Stereo microphone input, up to 11 General Purpose I/O’s, and 2 LED status outputs.For the latest firmware details and corresponding part numbers, please visit: www.microchip.com/wirelessfirmware
Please consider this deviceBM64
Roving Networks� RN52-I/RM Bluetooth audio module provides a fully integrated solution for delivering high-quality stereo audio in a small form factor. It combines a Class 2 Bluetooth radio with an embedded DSP processor controlled and configured by simple ASCII commands and GPIO. It integrates RF, a baseband controller, and DSP, making it a complete Bluetooth audio wireless link. The RN52-I/RM support HSP/HFP, A2DP, AVRCP, SPP, and iAP profiles and includes support for codecs such as SBC, aptX�, and AAC. It provides a UART interface, GPIO, stereo speaker outputs, stereo microphone inputs, and a USB port.Fully certified Bluetooth version 3.0 audio module, fully compatible with Bluetooth version 2.1+EDR, 1.2, and 1.1Software configurable through commands over UART console interfaceEmbedded Bluetooth stack profiles: SPP, A2DP, HFP/HSP, and AVRCPSupports iAP profile discovery for iPhone� and iPod� Bluetooth accessoriesAvailable as an A2DP audio source or sinkPostage-stamp-sized form factor, 13.6 x 26 x 3.2mmDual-channel, differential audio input and output for highest quality audioExternal audio codecs supported via PCM, SPDI/F, and SPI interfaceCastellated SMT pads for easy and reliable PCB mountingAdditional support for codecs such as aptX�, AAC, MP3, and othersEnvironmentally friendly, RoHS compliantCertifications: FCC, IC, CEBluetooth SIG certified
Fully qualified Bluetooth� version 3.0 module, fully compatible with Bluetooth version 2.1+EDR, 1.2, and 1.1 Software configurable through commands over UART console interface Dedicated GPIO pins enable MCUs to access control and status functions efficiently Postage-stamp-sized form factor, x 2.7 mm Embedded Bluetooth stack profiles: A2DP, AVRCP, HFP/HSP, and SPP Dual-channel, differential audio input and output for highest quality audio Supports iAP profile to discover iOS devices and apps Integrated amplifier for driving 16 speakers UART (SPP) data connection interfaces External audio CODECs supported via S/PDIF and I2S interface Castellated SMT pads for easy and reliable PCB mounting Environmentally friendly, RoHS compliant Certifications: FCC, ICS, CE Bluetooth SIG certified
High-quality, 2-channel audio streaming Wireless stereo headsets Automotive hands free audio Wireless audio docking station for smartphones Wireless speakers Intercom push-to-talk audio connection Remote control for media player Medical devices Computer accessories
Roving Network's RN52 Bluetooth audio module provides a highly integrated solution for delivering highquality stereo audio in a small form factor. It combines a class 2 Bluetooth radio with an embedded DSP processor. The module is programmed and controlled with a simple ASCII command language
The RN52 module complies with Bluetooth specification version 3.0. It integrates RF, a baseband controller, etc., making it a complete Bluetooth subsystem. The RN52 supports a variety of profiles including HSP/HFP, A2DP, AVRCP, SPP, and iAP. It provides a UART interface, several user programmable I/O pins, stereo speaker outputs, microphone inputs, and a USB port. Table 1-1 provides the general specifications for the module. Table 1-2 and Table 1-3 provide the module's weight, dimensions, and electrical characteristics.
Specification Bluetooth 3.0, class GHz GFSK, PI/4-DQPSK, 8 DPSK 3 Mbps 50 ohms UART, GPIO, AIO, USB, SPI, speaker, microphone 10 meters (33 feet) -85 dBm 0.1 % BER 4 dBm Description
Modulation Method Maximum Data Rate RF Input Impedance Interface Operation Range Sensitivity RF TX Power
Specification V DC Depends on profiles, 30 mA typical +85�C JESD22-A224 class 0 product ~ 90% non-condensing Description
Figure 1-1 shows the module's dimensions and Figure 1-2 shows recommended landing pattern and layout.
0.80 0.00 Host Ground Plane Edge (See Mounting Details)특징
- Fully certified Bluetooth version 3.0 audio module, fully compatible with Bluetooth version 2.1+EDR, 1.2, and 1.1
- Software configurable through commands over UART console interface
- Embedded Bluetooth stack profiles: SPP, A2DP, HFP/HSP, and AVRCP
- Supports iAP profile discovery for iPhone® and iPod® Bluetooth accessories
- Postage-stamp-sized form factor, 13.5 x 26 x 2.7mm
- Dual-channel, differential audio input and output for highest quality audio
- External audio codecs supported via I2S and S/PDIF interface
- Castellated SMT pads for easy and reliable PCB mounting
- Environmentally friendly, RoHS compliant
- Certifications: FCC, IC, CE
- Bluetooth SIG certified
![Microchip Technology, Inc Inventory Microchip Technology, Inc Inventory](/files/uploads/inventory/MICROCHIP/MICROCHIP.jpg)
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Tags | RN52-I/R, RN52-I, RN52, RN5 |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증