이 웹사이트는 쿠키를 사용합니다. 이 사이트를 이용함으로써 귀하는 쿠키 사용에 동의하게 됩니다. 자세한 내용은 다음을 참조하세요. 개인 정보 정책.

이미지는 참고용입니다. 제품 사양 보기

ADI OP27GZ

Name: OP27GZ
Rating: 4.5 (6 reviews)

Operational Amplifier, Precision, 1 Amplifier, 8 MHz, 2.8 V/µs, ± 4V to ± 22V, DIP, 8 Pins

브랜드: Analog Devices, Inc

제조업체부품 #: OP27GZ

데이터 시트: OP27GZ Datasheet (PDF)

패키지/케이스: CDIP-8

상품 유형: 증폭기 IC

RoHS 상태:

재고상태: 1000 PC, 새로운 원본

Warranty: 1 Year Ovaga Warranty - Find Out More

BOM에 추가

빠른 견적

다음에 대한 RFQ를 제출해 주십시오. OP27GZ 또는 우리에게 이메일을 보내: 이메일: [email protected], 12시간 이내에 연락드리겠습니다.

수량^*

이메일^*

담당자 이름^*

회사

주목

OP27GZ 일반적인 설명

The OP279 is a dual rail-to-rail, high output current, single supply amplifier.It is designed for low voltage applications that require either current or capacitive load drive capability.The OP279 can sink and source currents of ±80 mA (typ) and is stable with capacitive loads to 10 nF.

Applications with the benefit from the OP279's high output current include driving headphones, displays, transformers, and power transistors. The powerful output is combined with a unique input stage that maintains very low distortion with wide common-mode range, even in single supply designs.

The OP279 can be used as a buffer to provide much greater drive capability than can usually be provided by CMOS outputs.CMOS ASICs and DACs often have outputs that can swing to both the positive supply and ground, but are incapable of driving greater than a few milliamps.

Bandwith is typically 5 MHz and the slew rate is 3 V/µs, making these amplifiers well suited for single supply applications that require audio bandwidths when used in high gain configurations.Operation is guaranteed from voltages as low as 4.5 V, up to 12 V.

When using the OP279 in +5 volt systems, very good audio performance can be attained.THD is below 0.01% with a 600 Ohm load, and noise is a respectable 21 nV/Hz.Supply current is less than 3.5 mA per amplifier.

The OP279 is available in 8-pin plastic DIP and SO-8 surface mount packages.They are specified over the industrial (-40°C to +80°C) temperature range.

특징

Rail-to-Rail Inputs and Outputs
High Output Current: ±60 mA
Single Supply: 5 V to 12 V
Wide Bandwidth: 5 MHz
High Slew Rate: 3 V/±s
Low Distortion: 0.01%
Unity-Gain Stable
No Phase Reversal
Short-Circuit Protected
Drives Capacitive Loads: 10 nF

명세서

매개변수	값	매개변수	값
feature-type	Low Noise Amplifier	feature-manufacturer-type	Low Noise Amplifier
feature-number-of-channels-per-chip	1	feature-rail-to-rail
feature-process-technology		feature-output-type
feature-maximum-input-offset-voltage-mv	0.1@±15V	feature-maximum-supply-current-ma
feature-maximum-input-offset-current-ua	0.075@±15V	feature-maximum-input-bias-current-ua	0.08@±15V
feature-maximum-power-dissipation-mw		feature-typical-slew-rate-v-us	2.8@±15V
feature-typical-gain-bandwidth-product-mhz	8	feature-shut-down-support	No
feature-packaging	Tube	feature-rad-hard
feature-pin-count	8	feature-supplier-package	CDIP
feature-standard-package-name1	DIP	feature-cecc-qualified	No
feature-esd-protection	Yes	feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc	Yes

배송

	배송비	리드타임
DHL	$20.00-$40.00 (0.50 KG)	2-5 날
페덱스	$20.00-$40.00 (0.50 KG)	2-5 날
UPS	$20.00-$40.00 (0.50 KG)	2-5 날
TNT	$20.00-$40.00 (0.50 KG)	2-5 날
EMS	$20.00-$40.00 (0.50 KG)	2-5 날
등기 항공 우편	$20.00-$40.00 (0.50 KG)	2-5 날

처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.

지불

지불 조건		핸드 수수료
	은행 송금	US$30.00의 은행 수수료를 부과합니다.
	페이팔	4.0%의 서비스 수수료를 부과합니다.
	신용 카드	3.5% 서비스 수수료를 부과합니다.
	웨스턴 유니언	charge US.00 banking fee.
	돈 그램	US$0.00의 은행 수수료를 부과합니다.

보증

1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.

2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.

포장

단계1 :제품
단계2 :진공 포장
단계3 :정전기 방지 가방
단계4 :개별 포장
단계5 :포장 상자
단계6 :바코드 배송 태그

모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.

외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.

우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.

모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.

부품 포인트

The OP27GZ is a precision operational amplifier (op-amp) integrated circuit that offers low offset voltage, low noise, and high open-loop gain. It is commonly used in precision instrumentation and sensor applications where accuracy and stability are critical. The OP27GZ is known for its high performance and reliability in demanding analog circuit designs.
Equivalent

Some equivalent products of the OP27GZ chip are AD8676, OPA277, LT1012, and AD797. These are all precision operational amplifiers with similar specifications and performance characteristics.
Features

1. Low offset voltage: 25 µV max 2. Low input bias current: 0.2 nA max 3. Low noise: 9 nV/√Hz at 1 kHz 4. Wide supply voltage range: ±2 V to ±18 V 5. High open-loop gain: 120 dB 6. Low distortion: 0.0006% at 1 kHz
Pinout

The OP27GZ is a 8-pin dual operational amplifier with the following functions: Pin 1: Output A Pin 2: Inverting input A Pin 3: Non-inverting input A Pin 4: V- Pin 5: V+ Pin 6: Non-inverting input B Pin 7: Inverting input B Pin 8: Output B
Manufacturer

The manufacturer of the OP27GZ is Analog Devices. Analog Devices is an American multinational semiconductor company specializing in data conversion and signal processing technology. They design and manufacture a wide range of analog integrated circuits for various applications in industries such as automotive, communications, healthcare, and industrial.
Application Field

The OP27GZ is typically used in precision instrumentation applications such as data acquisition systems, medical equipment, and scientific instruments due to its low offset voltage, low noise, and high gain bandwidth. It is also suitable for use in control systems, test equipment, and audio systems where high precision and stability are required.
Package

The OP27GZ chip is in a 8-SOIC (Small Outline Integrated Circuit) package, with a surface mount form. It has a size of 4.90mm x 3.91mm.