이미지는 참고용입니다. 제품 사양 보기
주문 금액이
$5000ON NCT75MNR2G
Temperature Sensor Digital, Local -55°C ~ 125°C 11 b 8-DFN (2x2)
NCT75MNR2G 일반적인 설명
NCT75 is a two-wire serially programmable temperature sensor with an overtemperature/interrupt output pin to signal out of limit conditions. This is an open drain pin and can operate in either comparator or interrupt mode. Temperature measurements are converted into digital form using a high resolution (12 bit), sigma-delta, analog-to-digital converter (ADC). The device operates over the -55°C to +125°C temperature range.
Communication with the NCT75 is accomplished via the SMBus/I2C interface which is compatible with industry standard protocols. Three address selection pins, A2, A1 and A0, can be used to connect up to 8 NCT75s to a single bus. Through this interface the NCT75s internal registers may be accessed. These registers allow the user to read the current temperature, change the configuration settings and adjust the temperature limits.
The NCT75 has a wide supply voltage range of 3.0 V to 5.5 V. The average supply current is 575 µA at 3.3 V. It also offers a shutdown mode to conserve power. The typical shutdown current is 3 µA.
The NCT75 is available in three, space saving packages - DFN-8, MSOP-8 and SOIC-8 and is also fully pin and register compatible with the LM75 and the TCN75.
특징
- 12-bit temperature-to-digital converter
- Input voltage range from 3.0 V to 5.5 V
- Temperature range from -55°C to +125°C
- SMBus/I2C Interface
- Overtemperature Indicator
- Support for SMBus /ALERT
- Shutdown mode for low power consumption
- One-Shot Mode
애플리케이션
- Thermal Management
명세서
| 매개변수 | 값 | 매개변수 | 값 |
|---|---|---|---|
| Manufacturer | ON Semiconductor | Product Category | Temperature Sensors, Transducers |
| Series | NCT75 | Product | Temperature Sensor |
| Packaging | Digi-ReelR Alternate Packaging | Mounting-Style | SMD/SMT |
| Package-Case | DFN-8 | Operating-Temperature | -55°C ~ 125°C |
| Output-Type | I2C/SMBus | Features | One-Shot, Output Switch, Programmable Limit, Shutdown Mode |
| Voltage-Supply | 3 V ~ 5.5 V | Supplier-Device-Package | 8-DFN (2x2) |
| Configuration | Local | Resolution | 11 b |
| Accuracy | +/- 3 C | Sensor-Type | Digital, Local |
| Test-Condition | 0°C ~ 70°C (-55°C ~ 125°C) | Shutdown | Shutdown |
| Sensing-Temperature-Local | -55°C ~ 125°C | Sensing-Temperature-Remote | - |
| Accuracy-Highest-Lowest | ±1°C (±3°C) | Maximum-Operating-Temperature | + 125 C |
| Minimum-Operating-Temperature | - 55 C | Operating-Supply-Current | 800 uA |
| Interface-Type | 2-Wire I2C SMBus | Supply-Voltage-Max | 5.5 VDC |
| Supply-Voltage-Min | 3 VDC | Tags | NCT75M, NCT75, NCT7, NCT |
| Manufacturer: | onsemi | Product Category: | Board Mount Temperature Sensors |
| RoHS: | Details | Output Type: | Digital |
| Configuration: | Local | Accuracy: | +/- 3 C |
| Supply Voltage - Min: | 3 V | Supply Voltage - Max: | 5.5 V |
| Interface Type: | 2-Wire, I2C, SMBus | Resolution: | 12 bit |
| Minimum Operating Temperature: | - 55 C | Maximum Operating Temperature: | + 125 C |
| Shutdown: | Shutdown | Mounting Style: | SMD/SMT |
| Package / Case: | DFN-8 | Packaging: | MouseReel |
| Brand: | onsemi | Operating Supply Current: | 800 uA |
| Product: | Temperature Sensors | Product Type: | Temperature Sensor ICs |
| Series: | NCT75 | Factory Pack Quantity: | 3000 |
| Subcategory: | Sensors | Type: | Temperature Sensor |
| Unit Weight: | 0.000332 oz |
배송
| 배송 유형 | 배송비 | 리드타임 | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
| 지불 조건 | 핸드 수수료 | |
|---|---|---|
 |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
 |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
 |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
 |
웨스턴 유니언 | charge US.00 banking fee. |
 |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
![제품]( "제품")
단계1 :제품
-
![진공 포장]( "진공 포장")
단계2 :진공 포장
-
![정전기 방지 가방]( "정전기 방지 가방")
단계3 :정전기 방지 가방
-
![개별 포장]( "개별 포장")
단계4 :개별 포장
-
![포장 상자]( "포장 상자")
단계5 :포장 상자
-
![바코드 배송 태그]( "바코드 배송 태그")
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The NCT75MNR2G is a digital temperature sensor chip that offers high accuracy temperature measurement with a resolution of 9 to 12 bits. It features a wide temperature range of -55°C to +125°C and is ideal for various applications such as industrial control systems, power supply monitoring, and environmental monitoring.
-
Equivalent
Some equivalent products of the NCT75MNR2G chip are NCT75L120S, NCT75L120AS, and NCT75L120A. These chips are also temperature sensors and offer similar functionalities and features as the NCT75MNR2G chip. -
Features
NCT75MNR2G is a 75 V N-channel MOSFET with low on-resistance and high power dissipation capability. It features a compact package design, making it suitable for various applications such as power supplies, LED lighting, and motor control. -
Pinout
NCT75MNR2G is a 5-pin digital temperature sensor that provides temperature sensing with an accuracy of ±1°C. Pinout: 1-Vcc, 2-GND, 3-SDA (I2C data line), 4-SCL (I2C clock line), 5-ADDR (I2C address select). It is commonly used for temperature monitoring in electronic devices. -
Manufacturer
ON Semiconductor is the manufacturer of NCT75MNR2G. It is a global supplier of energy-efficient semiconductor components for a wide range of industries, including automotive, communications, computing, consumer, industrial, and medical. ON Semiconductor focuses on creating innovative and environmentally friendly solutions to help its customers reduce their carbon footprint and achieve sustainability goals. -
Application Field
The NCT75MNR2G is commonly used in temperature sensing applications such as in smartphones, tablets, laptops, and wearable devices for monitoring and controlling the temperature of the device. It is also suitable for industrial automation, consumer electronics, and automotive applications where accurate temperature measurements are required. -
Package
The NCT75MNR2G chip is a temperature sensor in a SOT-23 package. It is a surface-mount form factor that measures 2.9mm x 1.6mm x 1.4mm in size.
데이터 시트 PDF
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
![제품]( "제품")
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
![quantity]( "quantity")
최소 주문 수량은 1개부터입니다.
-
![shipping]( "shipping")
최저 국제 배송비는 $0.00부터 시작됩니다
-
![보장하다]( "보장하다")
모든 제품에 대해 365일 품질 보증
Efficient and effective electronic component for our business.