이미지는 참고용입니다. 제품 사양 보기
TI MSP430F5308IRGCR
16-bit Microcontrollers - MCU MSP430F530x Mixed Signal MCU
MSP430F5308IRGCR 일반적인 설명
The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 5 µs.
The MSP430F5310, MSP430F5309, and MSP430F5308 devices are microcontroller configurations with a 3.3-V LDO, four 16-bit timers, a high-performance 10-bit ADC, two USCIs (1), a hardware multiplier, DMA, an RTC module with alarm capabilities, and 31 or 47 I/O pins.
The MSP430F5304 device is a configuration with a 3.3-V LDO, four 16-bit timers, a high-performance 10-bit ADC, one USCI, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 31 I/O pins.
For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family Users Guide.
(1)In the 48-pin packages, the USCI functions that are pinned out are limited to what the user configures on port 4 with the port mapping controller. It may not be possible to bring out all functions simultaneously.
특징
- Low supply-voltage range:
3.6 V down to 1.8 V - Ultra-low power consumption
- Active mode (AM)
All system clocks active- 195 µA/MHz (typical) at 8 MHz, 3 V, flash program execution
- 115 µA/MHz (typical) at 8 MHz, 3 V, RAM program execution
- Standby mode (LPM3)
- Real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wakeup:
1.9 µA (typical) at 2.2 V,
2.1 µA (typical) at 3 V - Low-power oscillator (VLO), general-purpose counter, watchdog, and supply supervisor operational, full RAM retention, fast wakeup:
1.4 µA (Typical) at 3 V
- Real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wakeup:
- Off mode (LPM4)
Full RAM retention, supply supervisor operational, fast wakeup:
1.1 µA at 3 V (typical) - Shutdown mode (LPM4.5)
0.18 µA at 3 V (typical)
- Active mode (AM)
- Wake up from standby mode in less than 5 µs
- 16-bit RISC architecture, extended memory, up to 25-MHz system clock
- Flexible power-management system
- Fully integrated LDO with programmable regulated core supply voltage
- Supply voltage supervision, monitoring, and brownout
- Unified clock system (UCS)
- FLL control loop for frequency stabilization
- Low-power low-frequency internal clock source (VLO)
- Low-frequency trimmed internal reference source (REFO)
- 32-kHz watch crystals (XT1)
- High-frequency crystals up to 32 MHz (XT2)
- 16-bit Timer TA0, Timer_A with five capture/compare registers
- 16-bit Timer TA1, Timer_A with three capture/compare registers
- 16-bit Timer TA2, Timer_A with three capture/compare registers
- 16-bit Timer TB0, Timer_B with seven capture/compare shadow registers
- Two universal serial communication interfaces (USCIs)
- USCI_A0 and USCI_A1
- Enhanced UART supports automatic baud-rate detection
- IrDA encoder and decoder
- Synchronous SPI
- USCI_B0 and USCI_B1
- I2C
- Synchronous SPI
- USCI_A0 and USCI_A1
- Integrated 3.3-V power system
- 10-bit analog-to-digital converter (ADC) with window comparator
- Comparator
- Hardware multiplier supports 32-bit operations
- Serial onboard programming, no external programming voltage needed
- 3-channel internal DMA
- Basic timer with RTC feature
- Device Comparison summarizes the available family members
명세서
| 매개변수 | 값 | 매개변수 | 값 |
|---|---|---|---|
| Frequency (MHz) | 25 | Nonvolatile memory (kByte) | 16 |
| RAM (kByte) | 6 | ADC type | 10-bit SAR |
| Number of ADC channels | 10 | Number of GPIOs | 47 |
| Features | Real-time clock | UART | 2 |
| USB | No | Number of I2Cs | 2 |
| SPI | 4 | Number of comparator channels | 8 |
| Timers - 16-bit | 4 | Bootloader (BSL) | UART |
| Operating temperature range (°C) | -40 to 85 |
배송
| 배송 유형 | 배송비 | 리드타임 | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
 |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
| 지불 조건 | 핸드 수수료 | |
|---|---|---|
 |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
 |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
 |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
 |
웨스턴 유니언 | charge US.00 banking fee. |
 |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
![제품]( "제품")
단계1 :제품
-
![진공 포장]( "진공 포장")
단계2 :진공 포장
-
![정전기 방지 가방]( "정전기 방지 가방")
단계3 :정전기 방지 가방
-
![개별 포장]( "개별 포장")
단계4 :개별 포장
-
![포장 상자]( "포장 상자")
단계5 :포장 상자
-
![바코드 배송 태그]( "바코드 배송 태그")
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The MSP430F5308IRGCR chip is a microcontroller designed by Texas Instruments. It is part of the MSP430 family and features a 16-bit RISC architecture. The chip includes various peripheral modules such as UART, SPI, and I2C, making it suitable for a wide range of applications. It also offers low power consumption and high-performance capabilities, making it ideal for battery-powered devices.
-
Equivalent
Some equivalent products of the MSP430F5308IRGCR chip are MSP430F5308, MSP430F5304, MSP430F5309, and MSP430FR2033. -
Features
The MSP430F5308IRGCR is a microcontroller with 32KB flash memory, 4KB RAM, and special features like an integrated 16-bit sigma-delta analog-to-digital converter (ADC) and a programmable timer module. It also has multiple communication interfaces such as UART, SPI, and I2C for versatile connectivity options, making it suitable for various low-power applications. -
Pinout
The MSP430F5308IRGCR is a microcontroller with 64-pins. The pin count refers to the number of physical pins on the device that can be used for various functions such as input/output, power supply, and communication with other devices. -
Manufacturer
The manufacturer of the MSP430F5308IRGCR is Texas Instruments. Texas Instruments is a multinational technology company that specializes in designing and manufacturing semiconductors and integrated circuits for various industries, including consumer electronics, industrial automation, and telecommunications. -
Application Field
The MSP430F5308IRGCR can be used in various application areas such as industrial control systems, consumer electronics, portable medical devices, wireless communication devices, and automotive systems. It is a versatile microcontroller that offers low power consumption, high performance, and a wide range of peripherals to support these applications. -
Package
The MSP430F5308IRGCR chip is available in a 64-pin VQFN (Very Thin Quad Flat No-leads) package type. Its form factor is rectangular with four sides, and it measures 9mm x 9mm in size.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
![제품]( "제품")
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
![quantity]( "quantity")
최소 주문 수량은 1개부터입니다.
-
![shipping]( "shipping")
최저 국제 배송비는 $0.00부터 시작됩니다
-
![보장하다]( "보장하다")
모든 제품에 대해 365일 품질 보증
