ST L9908TR
Multiphase Motor Driver IGBT PWM, SPI 48-TQFP-EP (7x7)
제조업체부품 #: L9908TR
데이터 시트: L9908TR Datasheet (PDF)
패키지/케이스: TQFP 48 7x7x1.0
상품 유형: Motor Drivers, Controllers
L9908TR 일반적인 설명
L9908 is a gate driver unit (GDU) for controlling 6 N-channel FETs for brushless motors in automotive applications.Each one of the 3 half bridge drivers channels (HS/LS couples) can be independently configured allowing different load driving and is able to withstand -14 V to 95 V excursion on motor`s pins.Through 6 dedicated parallel inputs the pre-driver stages can be controlled independently supporting duty cycle operations from 0% to 100% and allowing to implement all kinds of electric motor control strategy. A dedicated combination of regulators, charge pumps and bootstrap circuits allows L9908 to be suitable to operate in passenger, commercial or hybrid vehicles.Safe operation of half bridges is ensured by shoot-through diagnosis, dead-time, short to battery, short to ground and open load detection plus a real time phase voltage monitoring.L9908 is equipped with 3 independent high accuracy current monitor channels with SPI-configurable input differential voltage ranges for ground referenced current measurements, with 5 V/3.3 V output dynamic range compatibility.L9908 implements diagnostics on external and internal supply, ground level, internal temperature.A 32-bit out of frame SPI-slave interface is implemented for communication up to 10 MHz between L9908 and uC. SPI communication is safe-guarded by 5-bit CRC, 1bit frame counter, frame length check and an SPI-configurable Window Watchdog.Specific CAN-controlled brushless motor evaluati.Specific CAN-controlled brushless motor evaluati.
특징
- AEC-Q100 qualified
- Full ISO26262 compliant, ASIL-D systems ready
- VDH motor supply voltage range from 4.5 V to 75 V for working in single (12 V systems), double (24 V systems) and 48 V battery applications
- 3.3 V internal supply voltage generated from 5 V on VDD pin
- Digital I/O compatible to 3.3 V/5 V logics
- 6 separate N-channel FET pre-drivers:
- dedicated source connection to each FET
- the device can withstand -14 V to 95 V on motor connection pins
- 0% to 100% duty cycle operation support
- dedicated PWM input pin for each gate driver
- 3 differential high accuracy current monitors for ground referred current measurements:
- ADC/DAC architecture
- SPI adjustable Gain Factor and Output Offset
- built-in error calibration
- the device can withstand -14 V to 6 V on input sensing pins
- SPI readable current measurement
- 0 to 4.6 V DAC output dynamic range
- 3 real time phase voltage monitor channels:
- SPI programmable phase voltage feedback;
- SPI readable phase duty cycle measurement;
- 32-bit - 10 MHz SPI interface with 5-bit CRC and 1bit frame counter for internal setting, self-test and full diagnostics
- Protection and diagnostic:
- SPI programmable VDS diagnostic and protection in on-state
- SPI programmable Dead Time protection
- SPI programmable Shoot-through diagnostic and protection
- Open load, short to GND and short to battery diagnostic in off-state
- Over-temperature diagnostic and protection with SPI programmable warning flag
- SPI readable Tj measurement
- Ground loss diagnostic
- System clock monitoring
- Power supply pins VDD, VDH, VBP over-voltage and under-voltage diagnostic
- FET driver supply VPRE and VCP under-voltage and over-voltage diagnostic
- SPI Window Watchdog
- Fault status flag output
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Product Name | L9908TR | Product Type | Automotive System Basis Chip |
Manufacturer | STMicroelectronics | Function | Voltage and current sensor for automotive applications |
Operating Temperature | -40°C ~ 125°C | Supply Voltage | 4.5V to 27V |
Output Current | Up to 30 mA | Interface | I²C |
Package / Case | 16-TSSOP |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The L9908TR chip is an automotive voltage regulator that regulates the voltage supplied to various components in a vehicle's electrical system. It offers high accuracy and stability, and is designed to operate in harsh automotive environments. The chip is commonly used in automotive applications to ensure consistent and reliable power supply to various electronic devices in the vehicle.
-
Equivalent
Some equivalent products to the L9908TR chip include the L9935, L9935TR, UCC27325, and DRV2700. -
Features
The L9908TR is an integrated circuit with features including a low-drop voltage regulator, a power switch, and a reset function. It has built-in protection mechanisms such as thermal shutdown, current limit, and short-circuit protection. The chip is designed for automotive applications and offers high efficiency, low quiescent current, and low noise. -
Pinout
The L9908TR is a 32-pin integrated circuit designed for automotive applications. It is used as a LIN (Local Interconnect Network) system basis chip. The pin count of the L9908TR is 32, and it serves various functions including communication with other network nodes, fault detection, power management, and diagnostics. -
Manufacturer
NXP Semiconductors is the manufacturer of the L9908TR. It is a Dutch global semiconductor supplier primarily focused on automotive technologies and secure connections for a smarter world. -
Application Field
The L9908TR is a versatile device typically used in automotive applications. It can be used for various purposes like controlling and monitoring electronic systems, sensing current and voltage, and managing power distribution. The device is commonly employed for motor control, LED lighting, battery management systems, and other automotive control applications. -
Package
The L9908TR chip comes in a TSSOP-16 package type, with a thickness of 1.2 mm.
데이터 시트 PDF
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증
The components I received from Ovaga arrived quickly and worked perfectly. Great job!