주문 금액이
$5000ST L6983IQTR
Buck Switching Regulator IC Positive, Isolation Capable Adjustable 1V 1 Output 3A (Switch) 16-WFQFN Exposed Pad
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
L6983IQTR 일반적인 설명
The L6983I is a highly specialized device tailored for isolated buck topology, offering precise adjustment of the primary output voltage and a secondary output derived through transformer ratio, eliminating the need for an optocoupler. With a primary sink capability of up to -4.5 A, energy transfer to the secondary side is optimized, and a tracked soft-start of the secondary output is enabled. Operating on a peak current mode architecture, this device functions in forced PWM mode with a 390 ns blanking time to filter out oscillations caused by transformer leakage inductance, enhancing robustness. The compact QFN16 3x3 mm package and internal compensation simplify design complexity and size. Additionally, users can program the switching frequency in the 200 kHz - 1 MHz range, with optional spread spectrum for improved EMC. The EN pin allows for enable/disable functionality, with a low shutdown current of 2 μA when disabled, and a swift 1.3 ms soft-start upon re-enabling. A Power Good open collector monitors the FB voltage, while pulse by pulse current sensing and thermal shutdown offer effective constant current protection and prevent thermal run-away
특징
- High-performance architecture
- Faster response times
- Simplified circuit design
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
feature-type | Synchronous Step Down | feature-maximum-power-dissipation-mw | |
feature-packaging | Tape and Reel | feature-rad-hard | |
feature-pin-count | 16 | feature-supplier-package | QFN EP |
feature-standard-package-name1 | feature-cecc-qualified | ||
feature-esd-protection | feature-escc-qualified | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증