주문 금액이
$5000Renesas iW2206-11
Power Factor Boost Controller for Solid State Lighting Solutions up to 250W
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
iW2206-11 일반적인 설명
High PF and Low THD
The iW2206 boost PFC controller uses Dialog's PF-BoostTM to provide high power factor (>0.9) and low THD (<10%) at full load across the input voltage range, and it can enable solutions that meet the IEC61000-3-2 requirements for harmonic currents. The device consumes less than 150mW no-load standby power at 230VAC for designs up to 100W of output power, making it ideal for solid state lighting where the front-end converter is always on.
The iW2206 integrates a full range of protection features including output over-voltage, over-power, input over-voltage and under-voltage, over-current and sense resistor short circuit protection, open loop and over temperature protection. The device comes in a tiny SOT23-6 package, enabling a smaller total solution size.
특징
PFC Boost Controller in SOT23-6
Can Meet IEC61000-3-2 Harmonic Current Requirements
PF > 0.9 and THD < 10% @ Full load Across Input Voltage
250W Maximum Output Power
Supports Wide AC Input Voltage – 90VAC to 305VAC with Tight AC Load and Line Regulation (±3%)
Fast PFC Ready Time < 0.2s
Standby Power - < 150mW at 100W and Input Voltage of 230VAC
Shut Down Function
- Pull Down VFB Pin for Lower Standby Power
Fully Protected
- Output Over-Voltage, Over-Power, Over-Current, Sense-Resistor Short Protections
- Input Voltage Under-Voltage and Over-Voltage Protection
- Built-In Over-Temperature Protection
- Open Loop Protection
애플리케이션
- High-Power USB Type-C™ Adapters and Hubs
- Commercial Lighting: External Fixture Drivers
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The IW2206-11 chip is an integrated power supply controller designed for offline LED lighting applications. It provides high-accuracy constant current control, enabling efficient LED driver solutions for various lighting applications. The chip offers various features such as dimming control, over-temperature protection, and high power factor correction. It is suitable for a wide range of LED lighting applications including residential, commercial, and outdoor lighting.
-
Features
The IW2206-11 is a power management IC that integrates various features such as primary side regulation, constant current and voltage control, and active burst mode. It also has advanced efficiency and low standby power consumption capabilities. -
Pinout
The IW2206-11 is a highly integrated AC/DC power controller that facilitates the design of compact and energy-efficient power supplies. It is built with an 8-pin configuration and supports various functions such as overvoltage protection, under-voltage lockout, soft-start, and frequency jitter to reduce EMI. -
Manufacturer
The manufacturer of the IW2206-11 is an electronics company called Dialog Semiconductor. It is a fabless semiconductor company, specializing in the design and development of integrated circuits. They provide power management solutions for mobile devices, automotive applications, industrial and consumer electronics, and other industries. -
Application Field
The IW2206-11 is typically used in AC-DC power supplies and adapters for a wide range of applications such as consumer electronics, home appliances, and industrial devices. Its high level of integration and advanced protection features make it suitable for various power management applications where space and efficiency are important considerations. -
Package
The IW2206-11 chip is available in a surface mount package type known as DFN (Dual Flat No-leads). The chip has a small form factor and measures approximately 3mm x 3mm in size.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증