이 웹사이트는 쿠키를 사용합니다. 이 사이트를 이용함으로써 귀하는 쿠키 사용에 동의하게 됩니다. 자세한 내용은 다음을 참조하세요. 개인 정보 정책.

이미지는 참고용입니다. 제품 사양 보기

주문 금액이

$5000

받으세요 $50 할인을 !

TI ISO5852SMDWREP

Name: ISO5852SMDWREP
Rating: 4.5 (10 reviews)

Advanced gate driver for high-power IGBT and MOSFET applications with increased noise immunity

브랜드: Texas Instruments

제조업체부품 #: ISO5852SMDWREP

데이터 시트: ISO5852SMDWREP 데이터 시트 (PDF)

패키지/케이스: 16-SOIC

RoHS 상태:

재고상태: 9,726 PC, 새로운 원본

Warranty: 1 Year Ovaga Warranty - Find Out More

빠른 견적

다음에 대한 RFQ를 제출해 주십시오. ISO5852SMDWREP 또는 우리에게 이메일을 보내: 이메일: [email protected], 12시간 이내에 연락드리겠습니다.

수량^*

이메일^*

담당자 이름^*

회사

주목

ISO5852SMDWREP 일반적인 설명

The ISO5852S-EP device is a 5.7-kV_RMS, reinforced isolated gate driver for IGBTs and MOSFETs with split outputs, OUTH and OUTL, providing 2.5-A source and 5-A sink current. The input side operates from a single 2.25-V to 5.5-V supply. The output side allows for a supply range from minimum 15-V to maximum 30-V. Two complementary CMOS inputs control the output state of the gate driver. The short propagation time of 76 ns provides accurate control of the output stage.

An internal desaturation (DESAT) fault detection recognizes when the IGBT is in an overcurrent condition. Upon a DESAT detect, a mute logic immediately blocks the output of the isolator and initiates a soft-turnoff procedure which disables the OUTH pin and pulls the OUTL pin to low over a time span of 2 µs. When the OUTL pin reaches 2 V with respect to the most-negative supply potential, V_EE2, the gate-driver output is pulled hard to the V_EE2 potential which turns the IGBT immediately off.

When desaturation is active, a fault signal is sent across the isolation barrier pulling the FLT output at the input side low and blocking the isolator input. Mute logic is activated through the soft-turnoff period. The FLT output condition is latched and can be reset only after the RDY pin goes high, through a low-active pulse at the RST input.

When the IGBT is turned off during normal operation with a bipolar output supply, the output is hard clamp to V_EE2. If the output supply is unipolar, an active Miller clamp can be used, allowing Miller current to sink across a low-impedance path which prevents the IGBT from dynamic turnon during high-voltage transient conditions.

The readiness for the gate driver to be operated is under the control of two undervoltage-lockout circuits monitoring the input-side and output-side supplies. If either side has insufficient supply, the RDY output goes low, otherwise this output is high.

The ISO5852S-EP device is available in a 16-pin SOIC package. Device operation is specified over a temperature range from –55°C to +125°C ambient.

특징

ISO58 series provides high-speed data transfer
Compact design for space-constrained applications
Suitable for industrial automation and IoT systems

명세서

매개변수	값	매개변수	값
Manufacturer	Texas Instruments	Product Category	Galvanically Isolated Gate Drivers
RoHS	Details	Series	ISO5852S-EP
Mounting Style	SMD/SMT	Package / Case	SOIC-16
Minimum Operating Temperature	- 55 C	Maximum Operating Temperature	+ 125 C
Technology	Si	Brand	Texas Instruments
Features	DESAT Protection, Split Output, Miller Clamp, Power Good, Fault Output, Reset, Soft Turn Off	Moisture Sensitive	Yes
Product	Isolated Gate Drivers	Product Type	Galvanically Isolated Gate Drivers
Propagation Delay - Max	110 ns	Factory Pack Quantity	2000
Subcategory	PMIC - Power Management ICs	Part # Aliases	V62/16623-01XE
Number of channels	1	Isolation rating	Reinforced
Withstand isolation voltage (VISO) (Vrms)	5700	Working isolation voltage (VIOWM) (Vrms)	2121
Transient isolation voltage (VIOTM) (VPK)	8000	Power switch	IGBT, MOSFET, SiCFET
Peak output current (A)	5	Output VCC/VDD (max) (V)	30
Output VCC/VDD (min) (V)	15	Input VCC (min) (V)	2.25
Input VCC (max) (V)	5.5	Propagation delay time (µs)	0.076
Input threshold	CMOS	Operating temperature range (°C)	-55 to 125
Rating	HiRel Enhanced Product	Bus voltage (max) (V)	2121
Rise time (ns)	18	Fall time (ns)	20
Undervoltage lockout (typ) (V)	12

배송

	배송비	리드타임
DHL	$20.00-$40.00 (0.50 KG)	2-5 날
페덱스	$20.00-$40.00 (0.50 KG)	2-5 날
UPS	$20.00-$40.00 (0.50 KG)	2-5 날
TNT	$20.00-$40.00 (0.50 KG)	2-5 날
EMS	$20.00-$40.00 (0.50 KG)	2-5 날
등기 항공 우편	$20.00-$40.00 (0.50 KG)	2-5 날

처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.

지불

지불 조건		핸드 수수료
	은행 송금	US$30.00의 은행 수수료를 부과합니다.
	페이팔	4.0%의 서비스 수수료를 부과합니다.
	신용 카드	3.5% 서비스 수수료를 부과합니다.
	웨스턴 유니언	charge US.00 banking fee.
	돈 그램	US$0.00의 은행 수수료를 부과합니다.