주문 금액이
$5000Renesas ISL32610EFHZ-T
RS-422/RS-485 Interface IC SINGL RS-485 1 8VCVR 5LD EXT TEMP 12
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ISL32610EFHZ-T 일반적인 설명
The ISL32610E, ISL32611E, ISL32612E are ±16. 5kV IEC61000 ESD protected, fractional unit load (UL), 1. 8V powered, single differential receivers (Rx) for balanced data communication using the RS-485 and RS-422 standards. With their 85µA supply currents, the receivers are optimized for low power applications, and deliver the lowest supply currents of any available single Rx IC To improve performance in low data rate applications with slow signal transitions, these Rx feature symmetrical switching points (±200mV) and increased hysteresis. The symmetrical switching points eliminate the duty cycle distortion introduced by full-failsafe type receivers, while the larger hysteresis increases noise immunity. The receivers present a 1/8 unit load to the data bus, which allows up to 256 devices on the network for large node count systems (for example, process automation, remote meter reading systems). The ISL32611E/ISL32612E Rx output is tri-statable using the RE/RE input. The receiver inputs feature a failsafe-if-open design, which ensures a logic high Rx output if Rx inputs are floating. Data rates up to 256kbps are achievable with this device at VCC = 1. 8V.
특징
- Wide Supply Voltage Range: 1.8V to 3.6V
- Ultra Low Quiescent Supply Current 110µA (maximum)
- IEC61000 ESD Protection on RS-485 Bus Pins ±16.5kV
- Class 3 ESD Level on all Other Pins >8kV HBM
- Symmetrical Switching Thresholds for Less Duty Cycle Distortion
- Larger Hysteresis for Improved Noise Immunity 70mV
- Data Rates up to 256kbps (1.8V) or 500kbps (3.3V)
- 1/8 Unit Load Allows up to 256 Devices on the RS-485 Bus
- Specified for +125°C Operation
- Three-State Rx Output Available
- 5V tolerant logic inputs
- Pb-Free (RoHS Compliant)
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Pin Count | 5 | Package Category | SOT23 (5-Pin) |
Released Date | Dec 27, 2019 |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증