이 웹사이트는 쿠키를 사용합니다. 이 사이트를 이용함으로써 귀하는 쿠키 사용에 동의하게 됩니다. 자세한 내용은 다음을 참조하세요. 개인 정보 정책.

이미지는 참고용입니다. 제품 사양 보기

주문 금액이

$5000

받으세요 $50 할인을 !

FT232HL-REEL

Name: FT232HL-REEL
Rating: 4.5 (10 reviews)

Lead Free PQFP48 USB Bus Controller, CMOS, LQFP-48

브랜드: Ftdi Chip

제조업체부품 #: FT232HL-REEL

데이터 시트: FT232HL-REEL 데이터 시트 (PDF)

패키지/케이스: LQFP48

상품 유형: Controllers

RoHS 상태:

재고상태: 9,458 PC, 새로운 원본

Warranty: 1 Year Ovaga Warranty - Find Out More

빠른 견적

다음에 대한 RFQ를 제출해 주십시오. FT232HL-REEL 또는 우리에게 이메일을 보내: 이메일: [email protected], 12시간 이내에 연락드리겠습니다.

수량^*

이메일^*

담당자 이름^*

회사

주목

FT232HL-REEL 일반적인 설명

USB TO UART/FIFO BRIDGE, -40 TO 85DEG C; Bridge Type:USB to UART, FIFO; Supply Voltage Min:1.62V; Supply Voltage Max:1.98V; IC Case / Package:LQFP; No. of Pins:48Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C RoHS Compliant: Yes

특징

Single channel USB to serial / parallel ports with a variety of configurations.
Entire USB protocol handled on the chip. No USB specific firmware programming required. USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible. Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design. UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter). USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec. USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec Supports a proprietary half duplex FT1248 interface with a configurable width, bidirectional data bus (1, 2, 4 or 8 bits wide). CPU-style FIFO interface mode simplifies CPU interface design. Fast serial interface option. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases. Adjustable receive buffer timeout. Option for transmit and receive LED drive signals. Bit-bang Mode interface option with RD# and WR# strobes Highly integrated design includes 5V to 3.3/+1.8V LDO regulator for VCORE, integrated POR function Asynchronous serial UART interface option with full hardware handshaking and modem interface signals. Fully assisted hardware or X-On / X-Off software handshaking. UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity. Auto transmit enable control for RS485 serial applications using the TXDEN pin. Operational mode configuration and USB Description strings configurable in external EEPROM over the USB interface. Configurable I/O drives strength (4, 8, 12 or 16mA) and slew rate. Low operating and USB suspend current. Supports self powered, bus powered and high power bus powered USB configurations. UHCI/OHCI/EHCI host controller compatible. USB Bulk data transfer mode (512 byte packets in Hi-Speed mode). +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant). Extended -40°C to 85°C industrial operating temperature range. Compact 48-pin Lead Free LQFP or QFN package Configurable ACBUS I/O pins.

명세서

매개변수	값	매개변수	값
Product Category	USB Interface IC	RoHS	Details
Series	FT232	Product	USB Controllers
Type	Bridge, USB to UART/FIFO	Mounting Style	SMD/SMT
Package / Case	LQFP-48	Standard	USB 2.0
Speed	High Speed (HS), Full Speed (FS)	Data Rate	12 Mb/s
Supply Voltage - Min	1.62 V	Supply Voltage - Max	1.98 V
Operating Supply Current	50 mA	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Brand	FTDI
Interface Type	UART	Moisture Sensitive	Yes
Operating Supply Voltage	1.8 V, 3.3 V	Product Type	USB Interface IC
Factory Pack Quantity	1500	Subcategory	Interface ICs
Tradename	H-CHIP

배송

	배송비	리드타임
DHL	$20.00-$40.00 (0.50 KG)	2-5 날
페덱스	$20.00-$40.00 (0.50 KG)	2-5 날
UPS	$20.00-$40.00 (0.50 KG)	2-5 날
TNT	$20.00-$40.00 (0.50 KG)	2-5 날
EMS	$20.00-$40.00 (0.50 KG)	2-5 날
등기 항공 우편	$20.00-$40.00 (0.50 KG)	2-5 날

처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.

지불

지불 조건		핸드 수수료
	은행 송금	US$30.00의 은행 수수료를 부과합니다.
	페이팔	4.0%의 서비스 수수료를 부과합니다.
	신용 카드	3.5% 서비스 수수료를 부과합니다.
	웨스턴 유니언	charge US.00 banking fee.
	돈 그램	US$0.00의 은행 수수료를 부과합니다.

보증

1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.

2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.

포장

단계1 :제품
단계2 :진공 포장
단계3 :정전기 방지 가방
단계4 :개별 포장
단계5 :포장 상자
단계6 :바코드 배송 태그

모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.

외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.

우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.

모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.

부품 포인트

The FT232HL-REEL chip is a USB 2.0 to multi-purpose UART/FIFO IC designed by FTDI for high-speed interfacing applications. It offers a range of capabilities including UART, FIFO, and Bit-Bang modes, supporting data transfer rates of up to 12 Mbps. The chip is widely used in various industries, such as industrial control, medical devices, and instrumentation, for easy USB-to-serial communication and data transfer.
Equivalent

Some equivalent products of the FT232HL-REEL chip include FTDI FT232RL, FT2232H, and FT2232HL.
Features

The FT232HL-REEL is a USB to UART/FIFO IC with a high-speed parallel interface and advanced features such as Single-Chip USB to UART/FIFO Interface, up to 12Mbaud data transfer rate, Single power supply 3.3V, 48mHz operating current, and various integrated features like USB Resistor Fuses, Integrated Level Converter, PWM Generator, and more.
Pinout

The FT232HL-REEL has a pin count of 32. It is a hi-speed USB to multipurpose UART/FIFO IC that uses FTDIChip-ID for security reasons. It is commonly used in applications that require USB connectivity and high-speed data transfer.
Manufacturer

The manufacturer of the FT232HL-REEL is FTDI (Future Technology Devices International) Ltd. It is a semiconductor company that specializes in the design, development, and supply of integrated circuit products for various applications, including USB connectivity and interfacing solutions.
Application Field

The FT232HL-REEL is a USB to UART/FIFO IC that is widely used in various applications, including industrial automation, consumer electronics, medical devices, test and measurement equipment, and more. It provides a simple and efficient way to interface USB with UART and FIFO interfaces, making it versatile for a range of applications.
Package

The FT232HL-REEL chip is packaged in a QFN-32 (Quad Flat No-Lead) package type. The form factor is small and rectangular with a size of 5mm x 5mm, making it suitable for compact electronic devices.