주문 금액이
$5000Microchip DSPIC33FJ32MC304T-E/ML
DSPIC33FJ32MC304T-E/ML from Microchip Technology
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
브랜드: Microchip Technology, Inc
제조업체부품 #: DSPIC33FJ32MC304T-E/ML
데이터 시트: DSPIC33FJ32MC304T-E/ML 데이터 시트 (PDF)
패키지/케이스: QFN-44
상품 유형: LED Drivers
DSPIC33FJ32MC304T-E/ML 일반적인 설명
The dsPIC33F16-bit device family employs a powerful 16-bit architecture, idealfor applications that rely on high-speed, repetitive computations, as wellas control. The devices are pin compatible with the PIC24HJ family ofdevices, and share a very high degree of compatibility with the dsPIC30Ffamily devices. This allows seamless migration options from/to PIC24F,dsPIC30F and dsPIC33F devices.
특징
- Operating Conditions:
- 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
- 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
- High-Performance DSC CPU:
- Modified Harvard architecture
- C compiler optimized instruction set
- 16-bit wide data path
- 24-bit wide instructions
- Linear program memory addressing up to 4M instruction words
- Linear data memory addressing up to 64 Kbytes
- 83 base instructions: mostly 1 word/1 cycle
- Two 40-bit accumulators with rounding and saturation options
- Flexible and powerful addressing modes: Indirect, Modulo and Bit-Reversed Software stack
- 16 x 16 fractional/integer multiply operations
- 32/16 and 16/16 divide operations
- Single-cycle multiply and accumulate: Accumulator write back for DSP operations and Dual data fetch
- Up to ±16-bit shifts for up to 40-bit data
- On-Chip Flash and SRAM:
- Flash program memory
- Data SRAM
- Boot, Secure, and General Security for program Flash
- Direct Memory Access (DMA):
- 8-channel hardware DMA
- Up to 2 Kbytes dual ported DMA buffer area (DMA RAM) to store data transferred via DMA
- Allows data transfer between RAM and a peripheral while CPU is executing code (no cycle stealing)
- Most peripherals support DMA
- Timers/Capture/Compare/PWM:
- Timer/Counters, up to five 16-bit timers: Can pair up to make two 32-bit timers
- One timer runs as a Real-Time Clock with an external 32.768 kHz oscillator and Programmable prescaler
- Input Capture (up to four channels): Capture on up, down or both edges
- 16-bit capture input functions and 4-deep FIFO on each capture
- Output Compare (up to four channels): Single or Dual 16-bit Compare modeand 16-bit Glitchless PWM mode
- Hardware Real-Time Clock/Calendar (RTCC): Provides clock, calendar, and alarm functions
- Interrupt Controller:
- 5-cycle latency
- 118 interrupt vectors
- Up to 53 available interrupt sources
- Up to three external interrupts
- Seven programmable priority levels
- Five processor exceptions
- Digital I/O:
- Peripheral pin Select functionality
- Up to 35 programmable digital I/O pins
- Wake-up/Interrupt-on-Change for up to 21 pins
- Output pins can drive from 3.0V to 3.6V
- Up to 5V output with open drain configuration
- All digital input pins are 5V tolerant
- 4 mA sink on all I/O pins
- System Management:
- Flexible clock options: External, crystal, resonator, internal RC, Fully integrated Phase-Locked Loop (PLL) and Extremely low jitter PLL
- Power-up Timer
- Oscillator Start-up Timer/Stabilizer
- Watchdog Timer with its own RC oscillator
- Fail-Safe Clock Monitor
- Reset by multiple sources
- Power Management:
- On-chip 2.5V voltage regulator
- Switch between clock sources in real time
- Idle, Sleep, and Doze modes with fast wake-up
- Analog-to-Digital Converters (ADCs):
- 10-bit ADC, 1.1 Msps or 12-bit, 500 Ksps conversion: two and four simultaneous samples
- Up to nine input channels with auto-scanning
- Conversion start can be manual or synchronized with one of four trigger sources and possible in Sleep mode
- Comparator Module:
- Two analog comparators with programmable input/output configuration
- CMOS Flash Technology:
- Low-power, high-speed Flash technology
- Fully static design
- 3.3V (±10%) operating voltage
- Industrial and Extended temperature
- Low power consumption
- Motor Control Peripherals:
- 6-channel 16-bit Motor Control PWM: three duty cycle generators
- Independent or complementary mode and programmable dead time and output polarity
- Edge-aligned or center-aligned, manual output override control, and one Fault input
- Trigger for ADC conversions
- PWM frequency for 16-bit resolution (@ 40>
- PWM frequency for 11-bit resolution (@ 40>
- 2-channel 16-bit Motor Control PWM
- One duty cycle generator, Independent or Complementary mode and programmable dead time and output polarity
- Edge-aligned or center-aligned, manual output override control and one fault input
- Trigger for ADC conversions
- PWM frequency for 16-bit resolution (@ 40>
- PWM frequency for 11-bit resolution (@ 40>
- 2-Quadrature Encoder Interface modules
- Phase A, Phase B, and index pulse input and 16-bit up/down position counter
![Microchip Technology, Inc Inventory Microchip Technology, Inc Inventory](/files/uploads/inventory/MICROCHIP/MICROCHIP.jpg)
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Tags | dsPIC33FJ32MC304T, dsPIC33FJ32MC304, dsPIC33FJ32MC3, dsPIC33FJ32M, dsPIC33FJ3, dsPIC33FJ, dsPIC33F, dsPIC33, dsPIC3, dsPIC, dsPI, DSP |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증