주문 금액이
$5000Microchip ATWILC3000-MR110UA-T
MAC link controller and Bluetooth 5
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
브랜드: Microchip Technology, Inc
제조업체부품 #: ATWILC3000-MR110UA-T
데이터 시트: ATWILC3000-MR110UA-T 데이터 시트 (PDF)
패키지/케이스: SMD
ATWILC3000-MR110UA-T 일반적인 설명
ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller and Bluetooth 5. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with simple SPI/SDIO-to-Wi-Fi and UART-to-Bluetooth interfaces.
The ATWILC3000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. The ATWILC3000 features fully integrated Power Amplifier, LNA, Switch and Power Management. Implemented in low-power CMOS technology, the ATWILC3000 offers very low power consumption while simultaneously providing high performance and minimal bill of materials.
The ATWILC3000 utilizes highly optimized 802.11-Bluetooth coexistence protocols. The only external clock sources needed for the ATWILC3000 is a high-speed crystal or oscillator and a 32.768 kHz clock for sleep operation.
The ATWILC3000 can be used in Linux, RTOS or Baremetal Environments.
The ATWILC3000 uses the same driver as the ATWILC1000. The ATWILC1000 Linux driver development is now an integrated development under the Linux4sam.org project.
The current stable release can be found at github.com/linux4sam/linux-at91/tree/master/drivers/staging/wilc1000
The current development branch can be found at github.com/linux4sam/linux-at91/tree/linux-5.10-at91/drivers/net/wireless/microchip
The WILC demo, serial bridge and firmware are hosted at github.com/linux4wilc
Microchip's complimentary and confidential Wireless Check online design review service is available for customers who have selected our products for their application design-in*.
*The online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
특징
- IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi plus Bluetooth 5 Low Energy Module
- Single spatial stream in 2.4GHz ISM band
- Integrated PA and T/R Switch
- Superior Sensitivity and Range via advanced PHY signal processing
- Wi-Fi Direct and Soft-AP support
- Supports Personal & Enterprise IEEE 802.11 WEP, WPA, WPA2 Security
- On-chip memory management engine to reduce host load
- SPI, SDIO for Wi-Fi and UART BLE host interfaces optimized for Linux
- HCI (Host Control Interface) via high speed UART
- Operating temperature range of -40C to +85C
- Bluetooth 5 Certified
- Adaptive Frequency Hopping
- Integrated PA and T/R Switch
- Superior Sensitivity and Range
- Module is Agency Certified in over 75 Countries
- Works in Linux, RTOS, or Baremetal Environments
![Microchip Technology, Inc Inventory Microchip Technology, Inc Inventory](/files/uploads/inventory/MICROCHIP/MICROCHIP.jpg)
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Protocol | Bluetooth Low Energy, Wi-Fi | Package | Surface Mount Module |
GPIO | 37 | Antenna Type | PCB, U.FL |
Concurrent Mode (STA and AP) | Yes | Operating Temp (°C) | -40 to +85 |
Operating Voltage (V) | 2.5 to 4.2 | Regulatory | FCC, CE, Canada |
SoftAP Client Count | 8 | Trust&Go | No |
Frequency Range | 2.412-2.472 MHz |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 |
![]() |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
![]() |
은행 송금 | US$30.00의 은행 수수료를 부과합니다. |
![]() |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. |
![]() |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. |
![]() |
웨스턴 유니언 | charge US.00 banking fee. |
![]() |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증