주문 금액이
$5000ACS709LLFTR-20BB-T
Current sensor IC offering fast response time and wide bandwidth in heat-dissipating casing
브랜드: Allegro Microsystems
제조업체부품 #: ACS709LLFTR-20BB-T
데이터 시트: ACS709LLFTR-20BB-T 데이터 시트 (PDF)
패키지/케이스: QSOP-24
RoHS 상태:
재고상태: 8,327 PC, 새로운 원본
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*모든 가격은 USD 단위입니다.
수량 | 단가 | 추가 가격 |
---|---|---|
1 | $3.646 | $3.646 |
10 | $3.177 | $31.770 |
30 | $2.899 | $86.970 |
100 | $2.619 | $261.900 |
500 | $2.488 | $1244.000 |
1000 | $2.429 | $2429.000 |
재고: 8,327 PCS
ACS709LLFTR-20BB-T 일반적인 설명
The ACS709LLFTR-20BB-T is a high-performance integrated circuit (IC) current sensor designed for precision measurement in a variety of applications. With a quiescent current of only 11mA, this sensor ensures low power consumption while providing accurate readings. The sensor operates with a bandwidth of up to 120kHz, allowing for real-time monitoring of current fluctuations. Its unipolar polarization ensures reliable and consistent measurements, making it ideal for use in power management systems and motor control applications
특징
- ▪ Industry-leading noise performance with 120 kHz bandwidth through proprietary amplifier and filter design techniques
- ▪ Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt, and prevents offset drift in high-side applications
- ▪ Small footprint surface mount QSOP24 package
- ▪ 2100 VRMS isolation voltage between primary current path and sensor IC electronics
- ▪ 1.1 mΩ primary conductor resistance for low power loss
- ▪ User-settable Overcurrent Fault level
- ▪ Overcurrent Fault signal typically responds to an overcurrent condition in <2 μs
- ▪ Filter pin capacitor sets analog signal bandwidth
- ▪ ±2% typical output error
- ▪ 3 to 5.5 V, single supply operation
- ▪ Factory trimmed sensitivity, quiescent output voltage, and associated temperature coefficients
- ▪ Chopper stabilization results in extremely stable quiescent output voltage
- ▪ Ratiometric output from supply voltage
명세서
매개변수 | 값 | 매개변수 | 값 |
---|---|---|---|
Product Category | Board Mount Current Sensors | RoHS | Details |
Current Rating | 11 mA | Sensor Type | Current Sense |
Type | Linear Hall | Operating Supply Voltage | 5 V |
Response Time | 4 us | Output Type | Ratiometric |
Series | ACS709 | Brand | Allegro MicroSystems |
Maximum Operating Temperature | + 150 C | Minimum Operating Temperature | - 40 C |
Moisture Sensitive | Yes | Package / Case | QSOP-24 |
Product Type | Current Sensors | Factory Pack Quantity | 2500 |
Subcategory | Sensors | Supply Voltage - Max | 5.5 V |
Supply Voltage - Min | 3 V |
배송
배송 유형 | 배송비 | 리드타임 | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
페덱스 | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 날 | |
등기 항공 우편 | $20.00-$40.00 (0.50 KG) | 2-5 날 |
처리 시간: 배송비는 지역 및 국가에 따라 다릅니다.
지불
지불 조건 | 핸드 수수료 | |
---|---|---|
은행 송금 | US$30.00의 은행 수수료를 부과합니다. | |
페이팔 | 4.0%의 서비스 수수료를 부과합니다. | |
신용 카드 | 3.5% 서비스 수수료를 부과합니다. | |
웨스턴 유니언 | charge US.00 banking fee. | |
돈 그램 | US$0.00의 은행 수수료를 부과합니다. |
보증
1. 귀하가 구입한 전자 부품에는 365일 보증이 포함되어 있으며, 우리는 제품 품질을 보장합니다.
2. 귀하가 받은 품목 중 일부가 완벽한 품질이 아닌 경우, 당사는 책임 있게 귀하의 환불 또는 교체를 준비할 것입니다. 그러나 품목은 원래 상태를 유지해야 합니다.
포장
-
단계1 :제품
-
단계2 :진공 포장
-
단계3 :정전기 방지 가방
-
단계4 :개별 포장
-
단계5 :포장 상자
-
단계6 :바코드 배송 태그
모든 제품은 정전기 방지 가방에 포장됩니다. ESD 정전기 방지 보호 장치와 함께 배송됩니다.
외부 ESD 포장 라벨은 당사 정보(부품 번호, 브랜드 및 수량)를 사용합니다.
우리는 선적 전에 모든 상품을 검사하고, 모든 제품이 양호한 상태인지 확인하고, 부품이 새로운 원본 일치 데이터시트인지 확인합니다.
모든 상품을 포장한 후 문제가 없는지 확인한 후 안전하게 포장하여 글로벌 특급으로 보내드립니다. 우수한 밀봉 무결성과 함께 탁월한 천공 및 인열 저항성을 나타냅니다.
부품 포인트
-
The ACS709LLFTR-20BB-T is a high precision, fully integrated current sensor chip produced by Allegro Microsystems. It offers a hall effect sensor with an industry-leading output linear voltage and 20A current sensing capability. This chip is used in a wide range of applications such as motor control, power supply monitoring, and energy management.
-
Equivalent
The equivalent products of ACS709LLFTR-20BB-T chip are ACS709LLF-20BB-T, ACS709LLFTR-20BB, and ACS709LLF-20BB. These chips are also current sensor ICs with similar specifications and features to the ACS709LLFTR-20BB-T. -
Features
1. High accuracy linear hall effect current sensor 2. 20A current sensing with reinforced isolation 3. Low power consumption 4. Overcurrent detection and fault output 5. Factory calibrated for easy integration 6. Wide operating temperature range (-40°C to 125°C) -
Pinout
The ACS709LLFTR-20BB-T has a pin count of 6. The functions of the sensor include measuring current and providing an output voltage signal relative to the current passing through the device. It is a linear Hall effect current sensor integrated circuit with a sensitivity of 60mV/A. -
Manufacturer
Allegro MicroSystems is the manufacturer of the ACS709LLFTR-20BB-T. Allegro MicroSystems is a leading semiconductor company that specializes in developing high-performance power and sensing solutions for a variety of applications, including automotive, industrial, and consumer electronics. Their products help improve safety, efficiency, and reliability in a wide range of industries. -
Application Field
The ACS709LLFTR-20BB-T is commonly used in applications such as motor control, power management, and battery management systems. Its hall effect sensor technology allows for precise current sensing in high voltage and high noise environments, making it ideal for a wide range of industrial and automotive applications. -
Package
The ACS709LLFTR-20BB-T chip is a surface mount package, available in a form of a tape and reel. It has a size of 5.00mm x 5.00mm.
우리는 고품질 제품, 사려 깊은 서비스 및 판매 후 보증을 제공합니다.
-
우리는 풍부한 제품을 보유하고 있으며 귀하의 다양한 요구를 충족시킬 수 있습니다.
-
최소 주문 수량은 1개부터입니다.
-
최저 국제 배송비는 $0.00부터 시작됩니다
-
모든 제품에 대해 365일 품질 보증